GW Instek은 5가지 모델이 있으며 최대 테스트 주파수가 최대 30MHz인 새로운 시리즈의 고주파 LCR 미터 ~ LCR-8200을 출시합니다. 전체 시리즈는 7인치 컬러 디스플레이를 채택하고 높은 측정 정확도(0.08%)가 특징입니다. 측정 결과는 선택한 측정 모드에 따라 수치 또는 그래픽으로 표시될 수 있으므로 사용자는 DUT의 특성을 최적으로 해석할 수 있습니다. 동시에 USB 장치 / RS-232C / 핸들러 및 GPIB와 같은 표준 인터페이스의 전체 범위를 통해 사용자는 추가 하드웨어 투자 비용에 대한 걱정 없이 가장 친숙한 인터페이스로 장비를 제어할 수 있습니다. 또한 이 시리즈는 그래픽 모드에서 작동할 때 USB 저장 기능도 제공합니다. 측정된 특성 곡선과 DUT 값은 후속 분석을 위해 저장됩니다.
클릭 하시면 이동합니다.
GOOD WILL INSTEK
LCR-8200 Series — High Frequency LCR Meter
• LCR-8200 Series
LCR-8201 ・ LCR-8205 ・ LCR-8210 ・ LCR-8220 ・ LCR-8230
특징
- 넓은 테스트 주파수: DC, 10Hz ~ 30MHz/20MHz/10MHz/5MHz/1MHz
- 7인치 LCD 컬러 디스플레이
- 0.08% 기본 정확도
- 17개의 선택 가능한 측정 매개변수에서 4개의 측정 결과를 동시에 자유롭게 표시
- 15단계 목록 측정
- 두 개의 곡선 스윕 모드
- 내부 DC 바이어스 전압 ±12V
- USB 저장 장치 사용 가능
- ALC 기능 사용 가능
- 표준 인터페이스: RS-232C, USB 호스트/장치, LAN, GPIB 및 핸들러
- 범용 전원 입력
Features
- Wide Test Frequency: DC, 10Hz ~ 30MHz/20MHz/10MHz/5MHz/1MHz
- 7″ LCD color Display
- 0.08% Basic Accuracy
- Displaying Four Measurement results simultaneously from 17 selectable measurement parameters freely
- 15 steps List Measurement
- Two Curves Sweep Mode
- Internal DC Bias Voltage ±12V
- USB Storage available
- ALC function available
- Standard Interfaces : RS-232C, USB host/device, LAN, GPIB and Handler
- Universal power input
설명
GW Instek은 5가지 모델이 있으며 최대 테스트 주파수가 최대 30MHz인 새로운 시리즈의 고주파 LCR 미터 ~ LCR-8200을 출시합니다. 전체 시리즈는 7인치 컬러 디스플레이를 채택하고 높은 측정 정확도(0.08%)가 특징입니다. 측정 결과는 선택한 측정 모드에 따라 수치 또는 그래픽으로 표시될 수 있으므로 사용자는 DUT의 특성을 최적으로 해석할 수 있습니다. 동시에 USB 장치 / RS-232C / 핸들러 및 GPIB와 같은 표준 인터페이스의 전체 범위를 통해 사용자는 추가 하드웨어 투자 비용에 대한 걱정 없이 가장 친숙한 인터페이스로 장비를 제어할 수 있습니다. 또한 이 시리즈는 그래픽 모드에서 작동할 때 USB 저장 기능도 제공합니다. 측정된 특성 곡선과 DUT 값은 후속 분석을 위해 저장됩니다.
Description
GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has five models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.
가격이 궁금하신가요?
더 많은 자료는?
GOOD WILL INSTEK
LCR-8200 Series — High Frequency LCR Meter
• LCR-8200 Series
LCR-8201 ・ LCR-8205 ・ LCR-8210 ・ LCR-8220 ・ LCR-8230
특징
- 넓은 테스트 주파수: DC, 10Hz ~ 30MHz/20MHz/10MHz/5MHz/1MHz
- 7인치 LCD 컬러 디스플레이
- 0.08% 기본 정확도
- 17개의 선택 가능한 측정 매개변수에서 4개의 측정 결과를 동시에 자유롭게 표시
- 15단계 목록 측정
- 두 개의 곡선 스윕 모드
- 내부 DC 바이어스 전압 ±12V
- USB 저장 장치 사용 가능
- ALC 기능 사용 가능
- 표준 인터페이스: RS-232C, USB 호스트/장치, LAN, GPIB 및 핸들러
- 범용 전원 입력
Features
- Wide Test Frequency: DC, 10Hz ~ 30MHz/20MHz/10MHz/5MHz/1MHz
- 7″ LCD color Display
- 0.08% Basic Accuracy
- Displaying Four Measurement results simultaneously from 17 selectable measurement parameters freely
- 15 steps List Measurement
- Two Curves Sweep Mode
- Internal DC Bias Voltage ±12V
- USB Storage available
- ALC function available
- Standard Interfaces : RS-232C, USB host/device, LAN, GPIB and Handler
- Universal power input
설명
GW Instek은 5가지 모델이 있으며 최대 테스트 주파수가 최대 30MHz인 새로운 시리즈의 고주파 LCR 미터 ~ LCR-8200을 출시합니다. 전체 시리즈는 7인치 컬러 디스플레이를 채택하고 높은 측정 정확도(0.08%)가 특징입니다. 측정 결과는 선택한 측정 모드에 따라 수치 또는 그래픽으로 표시될 수 있으므로 사용자는 DUT의 특성을 최적으로 해석할 수 있습니다. 동시에 USB 장치 / RS-232C / 핸들러 및 GPIB와 같은 표준 인터페이스의 전체 범위를 통해 사용자는 추가 하드웨어 투자 비용에 대한 걱정 없이 가장 친숙한 인터페이스로 장비를 제어할 수 있습니다. 또한 이 시리즈는 그래픽 모드에서 작동할 때 USB 저장 기능도 제공합니다. 측정된 특성 곡선과 DUT 값은 후속 분석을 위해 저장됩니다.
Description
GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200, which has five models and the maximum test frequency is up to 30MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%). The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs. Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200 can help users easily respond to the test requirements of passive components in R&D, engineering, and production.
연관상품