판매중인 ISOTECH 제품 리스트 : 도서관 : 지니어스인더스트리

ISOTECH판매중인 ISOTECH 제품 리스트


Isocal-6 Range - Hyperion 4936
Includes magnetic stirrer, probe basket, lid and 3 point traceable certificate

4936	Hyperion 4000 Series
	Temperature Range -25°C to 140°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

Stirred Liquid Bath/Stirred Ice/Water Bath
936-06-02	Stirred Liquid Container Kit
936-06-08	Support Kit Assembly for up to 8 thermometers
Metal Block Bath
936-06-01a	Standard Insert - 8 x 8mm x 2 x 4.5mm x 157mm deep
936-06-01b	Blank Insert
936-06-01c	Non Standard Insert (consult Isotech)
935-14-61/DB	Semi-Standard PRT - Temperature Range -50°C to 250°C
935-14-75/DB	90° Angled Semi-Standard PRT - Temperature Range -50°C to 250°C
Blackbody Source
936-06-03	Blackbody Target
Surface Sensor Calibrator
936-06-04	Surface Sensor Calibrator Kit
ITS-90 Fixed Point Apparatus
17401 M	Slim Gallium Melt Point Cell
B8/30/130	Water Triple Point Cell
UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
936-06-07	1 Litre C10 Silicon Oil (-35°C to 140°C) (½L Required)
932-12-74	Replacement Liquid Container Magnetic Follower (Qty 5)
935-14-114	Replacement Surface Sensor Probe
936-02-07	Replacement Surface Sensor Insert
936-06-09	Slim WTP Cell & Gallium Cell Holder Assembly
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-112	Carrying Case with wheels and pull out handle (nett)

Voltage supply	108/130V – 50/60Hz
	208/240V – 50/60Hz





Isocal-6 Range - Drago 4934
Includes magnetic stirrer, probe basket, lid and 3 point traceable certificate

4934	Drago 4000 Series
	Temperature Range 30°C to 250°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

Stirred Liquid Bath/Stirred Ice/Water Bath
936-06-02	Stirred Liquid Container Kit
936-06-08	Support Kit Assembly for up to 8 thermometers
Metal Block Bath
936-06-01a	Standard Insert - 8 x 8mm x 2 x 4.5mm x 157mm deep
936-06-01b	Blank Insert
936-06-01c	Non Standard Insert (consult Isotech)
935-14-61/DB	Semi Standard PRT - Temperature Range -50°C to 250°C
935-14-75/DB	90° Angled Semi Standard PRT - Temperature Range -50°C to 250°C
Blackbody Source
936-06-03	Blackbody Target
Surface Sensor Calibrator
936-06-04	Surface Sensor Calibrator Kit
ITS-90 Fixed Point Apparatus
17401 M	Slim Gallium Melt Point Cell
UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
580-06-09	1 Litre C20 Silicon Oil (20°C to 200°C) (½L Required)
915/09	1 Litre VHT Silicon Oil (150°C to 250°C) (½L Required)
935-14-114	Replacement Surface Sensor Probe
936-02-07	Replacement Surface Sensor Insert
936-06-09	Slim Gallium Cell Holder Assembly
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-112	Carrying Case with wheels and pull out handle (nett)

Voltage supply	108/130V – 50/60Hz
	208/240V – 50/60Hz





Isocal-6 Range - Europa 4520
Includes standard insert and 3 point traceable certificate

4520	Europa 4000 Series
	Temperature Range -45°C to 140°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

Metal Block Bath
951-02-15	Additional Standard Insert -2x4.5mm, 2x6.4mm, 1x8mm, 1x9.5mm x 157mm deep
951-02-15a	Blank Insert
951-02-15c	Non Standard Insert (consult Isotech)
951-06-07	Alternative insert type B - 1x13mm,1x10mm, 1x8mm,1x5mm, 1x3.5mm x 157mm deep
951-06-08	Alternative insert type C - 1x8mm, 6x6.5mm x 157mm deep
935-14-82/DB	Semi Standard PRT - Temperature Range -50°C to 250°C
935-14-75/DB	90° Angled Semi Standard PRT - Temperature Range -50°C to 250°C
Stirred Liquid Bath/Stirred Ice/Water Bath
951-06-01	Stirred Liquid Container Kit
921-02-06	Liquid in Glass Thermometer Support Kit
Blackbody Source
951-06-04	Blackbody Target
Surface Sensor Calibrator
951-06-02	Surface Sensor Calibrator Kit
ITS-90 Fixed Point Apparatus
17401 M	Slim Gallium Melt Point Cell
17724 M	Slim Mercury Melt Point Cell and Insulation Assembly
B8/30/130	Water Triple Point Cell, Container and 3 Caps
UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
520-05-01	C10 Silicon Oil (-35°C to 140°C) 0.1L required
932-12-55	Replacement Liquid Container Magnetic Follower (Qty 5)
935-14-83	Replacement Surface Sensor Probe
951-02-19	Replacement Surface Sensor Insert
951-02-29	Slim WTP Cell Container (nett)
951-02-30	Slim WTP Cell Container Caps (nett)
520-03-00	Slim Mercury Cell Insulation Assembly (nett)
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-111	Carrying Case with wheels and pull out handle (nett)

Voltage supply	108/130V – 50/60Hz
	208/240V – 50/60Hz





Isocal-6 Range - Venus 4951
Includes standard insert and 3 point traceable certificate

4951	Venus 4000 Series
	Temperature Range -35°C to 140°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

Metal Block Bath
951-02-15	Additional Standard Insert -2x4.5mm, 2x6.4mm, 1x8mm, 1x9.5mm x 157mm deep
951-02-15a	Blank Insert
951-02-15c	Non Standard Insert (consult Isotech)
951-06-07	Alternative insert type B - 1x13mm,1x10mm, 1x8mm,1x5mm, 1x3.5mm x 157mm deep
951-06-08	Alternative insert type C - 1x8mm, 6x6.5mmx157mm deep
935-14-82/DB	Semi Standard PRT - Temperature Range -50°C to 250°C
935-14-75/DB	90° Angled Semi Standard PRT - Temperature Range -50°C to 250°C
Stirred Liquid Bath/Stirred Ice/Water Bath
951-06-01	Stirred Liquid Container Kit
921-02-06	Liquid in Glass Thermometer Support Kit
Blackbody Source
951-06-04	Blackbody Target
Surface Sensor Calibrator
951-06-02	Surface Sensor Calibrator Kit
ITS-90 Fixed Point Apparatus
17401 M	Slim Gallium Melt Point Cell
B8/30/130	Water Triple Point Cell, Container and 3 Caps
UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
520-05-01	C10 Silicon Oil (-35°C to 140°C) 0.1L required
932-12-55	Replacement Liquid Container Magnetic Follower (Qty 5)
935-14-83	Replacement Surface Sensor Probe
951-02-19	Replacement Surface Sensor Insert
951-02-29	Slim WTP Cell Container (nett)
951-02-30	Slim WTP Cell Container Caps (nett)
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-111	Carrying Case with wheels and pull out handle (nett)

Voltage supply	108/130V – 50/60Hz
	208/240V – 50/60Hz





Isocal-6 Range - Calisto 4953
Includes standard insert and 3 point traceable certificate

4953	Calisto 4000 Series
	Temperature Range 30°C to 250°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

Metal Block Bath
951-02-15	Additional Standard Insert -2x4.5mm, 2x6.4mm, 1x8mm, 1x9.5mm x 157mm deep
951-02-15a	Blank Insert
951-02-15c	Non Standard Insert (consult Isotech)
951-06-07	Alternative insert type B - 1x13mm,1x10mm, 1x8mm,1x5mm, 1x3.5mm x 157mm deep
951-06-08	Alternative insert type C - 1x8mm, 6x6.5mm x 157mm deep
935-14-82/DB	Semi Standard PRT - Temperature Range -50°C to 250°C
935-14-75/DB	90° Angled Semi Standard PRT - Temperature Range -50°C to 250°C
Stirred Liquid Bath/Stirred Ice/Water Bath
951-06-01	Stirred Liquid Container Kit
921-02-06	Liquid in Glass Thermometer Support Kit
Blackbody Source
951-06-04	Blackbody Target
Surface Sensor Calibrator
951-06-02	Surface Sensor Calibrator Kit
ITS-90 Fixed Point Apparatus
17401 M	Slim Gallium Melt Point Cell
UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
951-06-06	C20 Silicon Oil (20°C to 200°C) 0.1L required
953-04-01	VHT Silicon Oil (150°C to 250°C) 0.1L required
932-12-55	Replacement Liquid Container Magnetic Follower (Qty 5)
935-14-83	Replacement Surface Sensor Probe
951-02-19	Replacement Surface Sensor Insert
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-111	Carrying Case with wheels and pull out handle (nett)

Voltage supply	108/130V – 50/60Hz
	208/240V – 50/60Hz





Dry Block Calibrator - Jupiter 4852
Includes standard insert and 3 point traceable certificate

4852	Jupiter 4000 Series
	Temperature Range 35°C to 660°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

Metal Block Bath
852-07-11	Additional Standard Insert -2x4.5mm, 2x6.4mm, 1x8mm, 1x9.5mm x 140mm deep
852-07-07	Blank Insert
852-07-07c	Non Standard Insert (consult Isotech)
852-09-03	Alternative insert type B - 1x13mm,1x10mm, 1x8mm,1x5mm, 1x3.5mm x 140mm deep
852-09-04	Alternative insert type C - 1x8mm, 6x6.5mm x 140mm deep
935-14-72/DB	Semi Standard PRT - Temperature Range -50°C to 670°C
935-14-79/DB	90° Angled Semi Standard PRT - Temperature Range -50°C to 660°C
Blackbody Source
852-09-05	Blackbody Target Kit
Surface Sensor Calibrator
852-07-15	Surface Sensor Calibrator Kit
UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
853-04-02	Rapid Air Cooling
935-14-118	Replacement Surface Sensor/Black Body Probe
852-07-14	Replacement Surface Sensor Insert
852-09-02	Spare Insulation Pack for Black Body Source (nett)
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-111	Carrying Case with wheels and pull out handle (nett)

Voltage supply	100/120V – 50/60Hz (nett) additional cost
	200/240V – 50/60Hz





Dry Block Calibrator - Gemini 4857/550
Includes 3 point traceable certificate

4857/550	Gemini 550/4000 Series
	Temperature Range 35°C to 550°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

935-14-72/DB	Semi Standard PRT - Temperature Range -50°C to 670°C
935-14-79/DB	90° Angled Semi Standard PRT - Temperature Range -50°C to 660°C

UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
Mixed	Set of 4 Aluminium Sleeves - optional single hole per sleeve. Specify from 4, 6, 8, 10, 12 or 14 x 150mm deep
857-07-01	Set of 4 Aluminium Sleeves - blank
857-07-03	One Aluminium Sleeve with 2 x 4.5mm x 150mm deep
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-111	Carrying Case with wheels and pull out handle (nett)

Voltage supply	100/120V – 50/60Hz
	200/240V – 50/60Hz





Dry Block Calibrator - Gemini 4857/700
Includes 3 point traceable certificate

4857/700	Gemini 700/4000 Series
	Temperature Range 50°C to 700°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

935-14-72/DB	Semi Standard PRT - Temperature Range -50°C to 670°C (for use up to 650°C)
935-14-79/DB	90° Angled Semi Standard PRT - Temperature Range -50°C to 660°C
935-14-63	Type N Thermocouple - Temperature Range 0°C to 1200°C (for use up to 700°C)

UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
Mixed	Set of 4 Bronze Sleeves - optional single hole per sleeve. Specify from 4, 6, 8, 10, 12 or 14 x 150mm deep
857-07-02	Set of 4 Bronze Sleeves - blank
857-07-04	One Bronze Sleeve with 2x4.5mm x 150mm deep
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-111	Carrying Case with wheels and pull out handle (nett)

Voltage supply	100/120V – 50/60Hz
	200/240V – 50/60Hz





Dry Block Calibrator - Gemini 4857/550/LRI
Includes large removeable insert with 8 x 8mm pockets x 154mm deep and 3 point traceable certificate

4857/550/LRI	Gemini 550 LRI 4000 Series
	Temperature Range 35°C to 550°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

935-14-72/DB	Semi Standard PRT - Temperature Range -50°C to 670°C
935-14-79/DB	90° Angled Semi Standard PRT - Temperature Range -50°C to 660°C

UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
976-07-01a	Additional Standard Removable Insert
976-07-01b	Blank Insert
976-07-01c	Non Standard Insert (consult Isotech)
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-112	Carrying Case with wheels and pull out handle (nett)

Voltage supply	100/120V – 50/60Hz
	200/240V – 50/60Hz





Dry Block Calibrator - Gemini 4857/700/LRI
Includes large removeable insert with 8 x 8mm pockets x 154mm deep and 3 point traceable certificate

4857/700/LRI	Gemini 700 LRI 4000 Series
	Temperature Range 50°C to 700°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

935-14-72/DB	Semi Standard PRT - Temperature Range -50°C to 670°C (for use up to 650°C)
935-14-79/DB	90° Angled Semi Standard PRT - Temperature Range -50°C to 660°C
935-14-63	Type N Thermocouple - Temperature Range 0°C to 1200°C (for use up to 700°C)

UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
976-07-02a	Additional Standard Removable Insert
976-07-02b	Blank Insert
976-07-02c	Non Standard Insert (consult Isotech)
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-112	Carrying Case with wheels and pull out handle (nett)

Voltage supply	100/120V – 50/60Hz
	200/240V – 50/60Hz





Portable Calibration Furnace - Pegasus 4853
Includes standard insert and 3 point traceable certificate

4853	Pegasus 4000 Series
	Temperature Range 150°C to 1200°C

ADVANCED	with Ethernet Interface and I-Cal Easy LOG Software
SITE	with Serial Communications and Cal Notepad Software
BASIC	with Serial Communications and Cal Notepad Software

Metal Block Bath
853-06-01	Additional Standard Insert - 4x8mm Pockets
853-06-02	Blank Insert
853-06-02b	Non Standard Insert (consult Isotech)
935-14-91	Semi Standard Type R Thermocouple - Temperature Range 0°C to 1300°C
Blackbody Source
853-06-03	Blackbody Target Kit (nett)
UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (when ordered) (nett)
UKAS-SYST ADVANCED ONLY	5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett)
UKAS-SIM ADVANCED ONLY	Calibration of input channels, electrical simulation only (nett)
Accessories
853-04-02	Rapid Air Cooling
935-14-115	Replacement Black Body Probe
970-05-01	Spare Insulation Pack for Black Body Source (nett)
853-06-04	Spare Insulation Pack for Metal Block Bath Insert (nett)
935-06-161	Current Loop Adaptor (ADVANCED and Site only)
931-22-111	Carrying Case with wheels and pull out handle (nett)

Voltage supply	100/120V – 50/60Hz
	200/240V – 50/60Hz





Portable Calibration Furnace - Pegasus T Model 853T
Includes Semi-Standard Type R Thermocouple 935-14-91 type R thermocouple and 3 point traceable certificate


853T	Pegasus T
	Temperature Range 150°C to 1200°C

Voltage supply	100/120V – 50/60Hz
	200/240V – 50/60Hz

Accessories
853-02-31	Standard Insert - 6 x 5mm pockets
853-02-30	Blank Insert
843-02-30B	Non Standard Insert (consult Isotech)
935-14-91	Replacement Semi Standard Type R Thermocouple - Temperature Range 0°C to 1300°C

UKAS Calibration Option
UKAS-TEMP	5 point calibration for block temperature and reference probe (nett)





Temperature Test Unit - Quick Cal Low Temperature
Includes 1 standard sleeve, 1 blank sleeve and 3 point traceable certificate


560	Low Temperature Quick Cal
	Temperature Range -12°C to 140°C

Accessories
560-06-01A	Additional Standard Sleeve with 1x6.8mm pocket x 120mm deep
560-06-01B	Blank Sleeve
560-06-01C	Non Standard Sleeve (consult Isotech)
935-14-98	Semi-Standard PRT - Temperature Range -50°C to 350°C
935-42-14	Rechargeable Battery (nett)
935-42-19	Battery Charger (220/240V - 50/60HZ) (nett)
935-42-22	Battery Charger (110/120V - 50/60HZ) (nett)
931-22-100	Carrying Case (nett)
UKAS	5 Point Comparison Calibration (nett)

Voltage supply	Switch Mode Voltage Supply 100 to 240V - 50/60HZ
	Farenheit Operation Available





Temperature Test Unit - Quick Cal High Temperature
Includes standard insert and 3 point traceable certificate


550	High Temperature Quick Cal
	Temperature Range 30°C to 350°C

Accessories
550-06-01A	Additional Standard Insert with 1x8mm, 2x4.5mm and 2x6.5mm x 115mm deep
550-06-01B	Blank Insert
550-06-01C	Non Standard Insert (consult Isotech)
935-14-98	Semi-Standard PRT - Temperature Range -50°C to 350°C
931-22-100	Carrying Case (nett)
UKAS	5 Point Comparison Calibration (nett)

Voltage supply	100/130V – 50/60Hz
	200/240V – 50/60Hz





Industrial Temperature Calibrators - Fast Cal
Include 3 point traceable certificate, Serial Communications, Cal Notepad Software and Carrying Case

907	Fast-Cal HTM 2010 with Fixed Block of 3 x 4.5mm, 1 x 6.5mm and 1x8mm x 145mm deep
	Temperature Range -35°C to 140°C
	BASIC Version
	COMPLETE with Semi Standard 935-14-82/DB

907	Fast-Cal Low with standard insert 2x4.5mm, 1x6.5mm and 1x8mm x 140mm deep
	Temperature Range -35°C to 140°C
	BASIC Version
	COMPLETE with Semi Standard 935-14-82/DB

907	Fast-Cal Medium with standard insert 2x4.5mm, 1x6.5mm and 1x8mm x 140mm deep
	Temperature Range 30°C to 350°C
	BASIC Version
	COMPLETE with Semi Standard 935-14-98/DB

907	Fast-Cal High with standard insert 2x4.5mm, 1x6.5mm and 1x8mm x 140mm deep
	Temperature Range 35°C to 650°C
	BASIC Version
	COMPLETE with Semi Standard 935-14-72/DB
	COMPLETE with Semi Standard 935-14-63/DB

Acessories
907-02-03	Additional Standard Insert (Low and Medium)
907-02-03b	Blank Insert (Low and Medium)
907-02-03c	Special Insert (Low and Medium)
907-02-03d	Additional Standard Insert (High only)
907-02-03f	Blank Insert (High only)
907-02-03g	Special Insert (High only)
UKAS	5 Point Comparison Calibration (nett)

Voltage supply	100/130V – 50/60Hz
	200/240V – 50/60Hz





ITS-90 Isothermal Towers
Integrated ITS-90 Fixed Point Calibration System with Certificate of Purity and a Melt and Freeze Curve. Serial Communications and Cal Notepad Software.


490	Indium 156.5985°C
491	Tin 231.928°C
492	Zinc 419.527°C
493	Aluminium 660.323°C


Special Package Price
Tin, Zinc and Aluminium systems when ordered together


Voltage supply	108/130V – 50/60Hz
	208/240V – 50/60Hz

Calibration Option	UKAS Fixed Point Cell Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





Slim Fixed Point Cells Sealed
99.9999% Pure. With Certificate of Conformity

Quartz Clad Slim Fixed Point Cells
Require to be hand carried
17668 QS	Indium 156.5985°C
17669 QS	Tin 231.928°C
17671 QS	Zinc 419.527°C
17672 QS	Aluminum 660.323°C
17673 QS	Silver 961.78°C
17674 QS	Copper 1084.62°C

Metal Clad Slim Fixed Point Cells
Transportable
17401 M	Gallium 29.7646°C
17724 M	Mercury -38.8344°C
17668 ML	Indium 156.5985°C
17669 ML	Tin 231.928°C
17671 ML	Zinc 419.527°C
17672 ML	Aluminum 660.323°C

Accessories
510-05-00	Inconel basket including insulators for use with Medusa - Indium to Zinc (nett)
511-05-01	Inconel basket including insulators for use with Medusa 511 - Aluminium (nett)
426-04-00	Inconel basket including insulators for use with Oberon - Aluminium to Copper (nett)

Calibration Option	Traceable and UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties

Hazardous (consult Isotech)	Due to the hazardous nature of Gallium and Mercury these cells are packed and shipped in accordance to IATA specification





Water Triple Point Cells
With Certificate of Conformity


B8/30/130	Temperature, 0.01°C
B12/40/210	Temperature, 0.01°C
B12/46/210	Temperature, 0.01°C


Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





Isocal-6 Range - Oceanus-6
Includes standard insert, 3 point traceable Certificate Serial Communications and Cal Notepad Software

580	Oceanus-6Plus
	Temperature Range 45°C below ambient to 140°C

	BASIC Version
	SITE Version

Metal Block Bath
580-06-03	Additional Standard Insert - 6x8mm x 250mm deep
580-06-04	Blank Insert
580-06-05	Non Standard Insert (consult Isotech)
580-06-06	Adjustable Equalising Block - 6x8mm x 157mm deep
935-14-85/DB	Semi Standard PRT - Temperature Range -50°C to 250°C
UKAS	5 Point Comparison Calibration (nett)
Stirred Liquid Bath/Stirred Ice/Water Bath
580-06-07	Stirred Liquid Container for alcohol’s, water and oils
580-06-00	Liquid in Glass Thermometer Support Kit
Blackbody Source
580-02-12	Blackbody Target
Surface Sensor Calibrator
580-06-08	Surface Sensor Calibrator Kit
ITS-90 Fixed Point Apparatus
17401	Gallium Melt Point Cell & Support
B12/46/210	Water Triple Point Cell & Supports
Accessories
936-06-07	C10 Oil (-35°C to 140°C) 1 Litre required
932-12-74	Replacement Liquid Container Magnetic Follower (Qty 5)
935-14-114	Replacement Surface Sensor Probe
580-02-11	Replacement Surface Sensor Insert
580-06-01	WTP Cell Support (nett)
580-06-02	Gallium Cell Support (nett)
931-22-58	Storage Case (nett)

Voltage supply	100/130V – 50/60Hz
	200/240V – 50/60Hz





Dry Block Calibrator - Medusa 510
Includes standard insert, 3 point traceable Certificate Serial Communications and Cal Notepad Software

510	Medusa 510
	Temperature Range 30°C to 550°C

	BASIC Version
	SITE Version

Metal Block Bath
510-06-01	Additional Standard Insert - 6x8mm x 250mm deep
510-06-02	Blank Insert
510-06-03	Non Standard Insert (consult Isotech)
510-06-04	Adjustable Equalising Block - 6 x 8mm holes x 157mm deep
935-14-95H/DB	Semi Standard PRT - Temperature Range -80°C to 670°C
UKAS	5 Point Comparison Calibration (nett)
Blackbody Source
510-06-05	Blackbody Target
Surface Sensor Calibrator
510-06-06	Surface Sensor Calibrator Kit
ITS-90 Fixed Point Apparatus - Metal Clad Slim Fixed Point Cells
Transportable
17668 ML	Slim Metal Clad Indium Fixed Point Cell
17669 ML	Slim Metal Clad Tin Fixed Point Cell
17671 ML	Slim Metal Clad Zinc Fixed Point Cell
ITS-90 Fixed Point Apparatus - Quartz Clad Slim Fixed Point Cells
Require to be hand carried
17668 QS	Slim Quartz Clad Indium Fixed Point Cell
17669 QS	Slim Quartz Clad Tin Fixed Point Cell
17671 QS	Slim Quartz Clad Zinc Fixed Point Cell
Accessories
935-14-66	Replacement Standard Thermocouple for BB Target
935-14-118	Replacement Surface Sensor Probe
510-02-02	Replacement Surface Sensor Calibrator Insert
510-05-00	Slim Cell Holder including Insulators - Indium to Zinc (nett)
931-22-58	Storage Case (nett)

Voltage supply	100/130V – 50/60Hz
	200/240V – 50/60Hz





Dry Block Calibrator - Medusa 3 511
Includes standard insert, 3 point traceable Certificate Serial Communications and Cal Note Pad Software


511	Medusa 3 511
	Temperature Range 50°C to 700°C

	BASIC Version
	SITE Version

Metal Block Bath
511-06-01	Additional Standard Insert - 6x8mm x 250mm deep
511-06-02	Blank Insert
511-06-03	Non Standard Insert (consult Isotech)
511-06-04	Adjustable Equalising Block - 6x8mm x 157mm deep
935-14-95H/DB	Semi Standard PRT - Temperature Range -80°C to 670°C
UKAS	5 Point Comparison Calibration (nett)
Blackbody Source
511-06-05	Blackbody Target
Surface Sensor Calibrator
511-06-06	Surface Sensor Calibrator Kit
ITS-90 Fixed Point Apparatus - Metal Clad Slim Fixed Point Cells
Transportable
17668 ML	Slim Metal Clad Indium Fixed Point Cell
17669 ML	Slim Metal Clad Tin Fixed Point Cell
17671 ML	Slim Metal Clad Zinc Fixed Point Cell
17672 ML	Slim Metal Clad Aluminium Fixed Point Cell
ITS-90 Fixed Point Apparatus - Quartz Clad Slim Fixed Point Cells
Require to be hand carried
17668 QS	Slim Quartz Clad Indium Fixed Point Cell
17669 QS	Slim Quartz Clad Tin Fixed Point Cell
17671 QS	Slim Quartz Clad Zinc Fixed Point Cell
17672 QS	Slim Quartz Clad Aluminium Fixed Point Cell
Accessories
935-14-66	Replacement Standard Thermocouple for BB Target
935-14-118	Replacement Surface Sensor Probe
510-02-02C	Replacement Surface Sensor Calibrator Insert
510-05-00	Slim Cell Holder including Insulators - Indium to Zinc (nett)
511-05-01	Slim Cell Holder including Insulators - Aluminium (nett)
931-22-58	Storage Case (nett)

Voltage supply	100/130V – 50/60Hz
	200/240V – 50/60Hz





POTTS - Oberon
Includes Serial Communications and Cal Notepad Software


426	Oberon POTTS
	Temperature Range 450°C to 1100°C

Voltage supply	110V – 50/60Hz only

Metal Block Bath
426-06-05	Adjustable Equalising Block - 6x8mm x 160mm deep

ITS-90 Fixed Point Apparatus - Quartz Clad Slim Fixed Point Cells
Require to be hand carried
17672 QS	Slim Quartz Clad Aluminium Fixed Point Cell
17673 QS	Slim Quartz Clad Silver Fixed Point Cell
17674 QS	Slim Quartz Clad Copper Fixed Point Cell

Accessories
426-04-00	Inconel Cell Basket including Insulators - Aluminium to Copper - for use with Oberon (nett)
935-19-63	Isolation Transformer to allow operation from 240V supply (nett)
935-19-71	Isolation Transformer to allow operation from 220V supply (nett)

Calibration Option	UKAS Fixed Point Cell Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





TTI-10 Handheld Thermometer
Includes Cal Notepad Software for monitoring and logging, USB Cable, 2 Lemo Connectors to suit, protective rubber boot and traceable certificate


933	TTI-10 Handheld Thermometer
	Temperature Range -200°C to 850°C

Semi Standard Pt100's	Includes Probe Carrying Case and fitted Lemo Connector
935-14-112/TTI	Temperature Range -50°C to 250°C
935-14-116/TTI	Temperature Range -100°C to 450°C
935-14-61/TTI	Temperature Range -50°C to 250°C

Accessories
956	Terminal Adaptor
931-22-101	Carrying Case (nett)

UKAS System Calibration Package Option	The following prices are for the UKAS System Calibration only - appropriate Semi-Standard must be selected at time of ordering

TTI-10-14-116/TTI	4 Point System Calibration over the Temperature Range 0°C to 420°C (nett)

2nd	935-14-116/TTI Calibrated on Channel 2 at the same time and same points (nett)

TTI-10-14-61-SYST or TTI-10-14-112	4 Point System Calibration over the Temperature Range -50°C to 200°C (nett)

2nd	935-14-61/TTI or 935-14-112/TTI Calibrated on Channel 2 at the same time and same points (nett)





milliK Precision Thermometer
Includes Cal Notepad Software for monitoring and logging, RS232 Cable, 2 Lemo Connectors to suit and traceable certificate


923	milliK Precision Thermometer
	Temperature Range -270°C to 1820°C
Semi Standard Pt100's	Include Carrying Case and fitted Lemo Connector
935-14-13/TTI	Temperature Range -196°C to 250°C
935-14-16/TTI	Temperature Range -100°C to 450°C
935-14-116/TTI	Temperature Range -100°C to 450°C
935-14-61/TTI	Temperature Range -50°C to 250°C
935-14-72/TTI	Temperature Range -50°C to 670°C
935-14-95H/TTI	Temperature Range -80°C to 670°C
935-14-95L/TTI	Temperature Range -200°C to 165°C
Working SPRT's	Include Carrying Case and fitted Lemo Connector
Metal Clad 909L/100Ω/TTI	Temperature Range -200°C to 165°C - Length 480mm
Quartz Clad 909Q/100Ω/TTI	Temperature Range -200°C to 550°C - Length 480mm
Accessories
956	Terminal Adaptor
931-22-102	Carrying Case (nett)
Voltage supply	Universal power supply allows operation from 90 to 240V 50/60Hz

SYSTEM CALIBRATION
Only applicable when milliK and semi-standards Pt100 purchased at the same time
Temperature Range	Calibration Points/Typical Uncertainty
-196°C to 232°C	-196°C (±0.030°C), -38.8°C (±0.015°C), 0.01°C (±0.015°C), 156°C (±0.025°C),232°C (±0.025°C)
-196°C to 29.76°C	-196°C (±0.030°C), -38.8°C (±0.015°C), 0.01°C (±0.015°C), 29.76°C (±0.015°C)
-50°C to 250°C	-50°C (±0.025°C), 0.01°C (±0.015°C), 29.76°C (±0.015°C), 156°C (±0.025°C), 250°C (±0.030°C)
-80°C to 419°C	-80°C (±0.030°C), -38.8°C (±0.015°C), 0.01°C (±0.015°C), 232°C (±0.025°C), 419°C (±0.040°C)
0.01°C to 419°C	0.01°C (±0.015°C), 232°C (±0.025°C), 419°C (±0.040°C)
-80°C to 660°C	-80°C (±0.030°C), -38.8°C (±0.015°C), 0.01°C (±0.015°C), 232°C (±0.025°C), 419°C (±0.040°C), 660°C (±0.050°C)
0.01°C to 660°C	0.01°C (±0.015°C), 232°C (±0.025°C), 419°C (±0.040°C), 660°C (±0.050°C)
350°C to 1100°C	350°C (±0.8°C), 600°C (±0.8°C), 850°C (±0.8°C), 1100°C (±0.8°C)
350°C to 1300°C	350°C (±0.8°C), 700°C (±0.8°C), 1000°C (±0.8°C), 1300°C (±1.8°C)
ADDITIONAL SYSTEM CALIBRATION OPTIONS - Applicable when millik and semi-standard probe purchased at same time
Temperature Range	Calibration Points/Typical Uncertainty
0.01°C to 156°C	0.01°C (0.01°C), 156°C (0.015°C)
-38°C to 29.7646°C	-38°C (0.015°C), 0.01°C (0.01°C), 29.76°C (0.01°C)
*See Brochure - MILLIK HIGH ACCURACY TEMPERATURE MEASUREMENT






millisKanner Channel Expander
Eight Channel Expansion Unit for milliK, maximum of four units per milliK


914a	millisKanner Channel Expander (first unit)
	Includes following cables suitable for connecting milliK to millisKanner
932-42-33	Universal Power Suply allows operation from 90 to 240V 50/60Hz (suitable to power up to 4 millisKanners)
914-03-02	Digital Connecting Cable
914-02-02	milliK to millisKanner linking cable

914b	millisKanner Channel Expander (subsequent)
	Includes following cables suitable for connecting millisKanner to milliskanner
914-02-03	DC Link Cable (Univeral PSU not required)
914-03-02	Digital Connecting Cable
914-02-04	millisKanner to millisKanner linking cable





True Temperature Indicator - TTI 22
Includes Cal Notepad Software for monitoring and logging, RS232 Cable and 2 Lemo Connectors to suit


926	True Temperature Indicator TTI 22
	Temperature Range -250°C to 962°C

Selector Switch
954	8 Way Selector Switch for PRT's

Semi Standard Pt100's	Include Carrying Case and Lemo Connector suitable for use with TTI 22
935-14-13/TTIb	Temperature Range -196°C to 250°C
935-14-16/TTIb	Temperature Range -100°C to 450°C
935-14-61/TTIb	Temperature Range -50°C to 250°C
935-14-72/TTIb	Temperature Range -50°C to 670°C
935-14-95H/TTIb	Temperature Range -80°C to 670°C
935-14-95L/TTIb	Temperature Range -200°C to 165°C

Working SPRT's	Include Carrying Case and Lemo Connector suitable for use with TTI 22
Metal Clad 909L/100Ω/TTIb	Temperature Range -200°C to 165°C
Metal Clad 909L/100Ω/TTIb	Length 480mm
Quartz Clad 909Q/100Ω/TTIb	Temperature Range -200°C to 550°C
Quartz Clad 909Q/100Ω/TTIb	Length 480mm

Accessories
956/TTI22	Terminal Adaptor
931-22-106	Carrying Case (nett)

Voltage supply	Universal power supply allows operation from 90 to 240v 50/60 Hz

Calibration Option	UKAS Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





Terminal Adaptor - Model 956
Simple Accessory providing 4mm terminal posts for the connection of bare wires, spade terminals or 4mm plugs


956	Terminal Adaptor for use with TTI 7/TTI 6
956/TTI 22	Terminal Adaptor for use with TTI 22





Miniature Fixed Resistor - Model 836
Precise and Stable for Industrial References


836	FRM 10Ω
836	FRM 25Ω
836	FRM 100Ω
836	FRM 1,000Ω
836	FRM 10,000Ω


Calibration Option	UKAS Calibration available refer to Calibration Price List





Selector Switch - 8 Way
Use with I-Cal Software


954	8 Way Selector Switch for PRT's
958	8 Way Selector Switch for T/C's


Voltage supply	Switch Mode voltage supply 100 to 250V





Surface Measurement - Model 944
Includes Semi-Standard Thermocouple 935-14-81


944	Model 944
	Temperature Range 30°C to 350°C

Voltage supply	100/120V – 50/60Hz
	200/240V – 50/60Hz
Accessories
935-14-81	Replacement Semi Standard Thermocouple
	When a replacement 935-14-81 is purchased the 944 must be returned to Isotech

Calibration Option	5 Point Traceable Calibration (nett)





Surface Sensor Calibrator - Small Hot Plate



983	Small Hot Plate
	Temperature Range 35°C to 350°C

Voltage supply	100/115V – 50/60Hz
	200/230V – 50/60Hz





Reference Probes - Semi Standard Platinum Resistance Thermometers
Includes carrying case


935-14-112	Temperature Range -50°C to 250°C
935-14-13	Temperature Range -196°C to 250°C
935-14-113	Temperature Range -100°C to 250°C
935-14-16	Temperature Range -100°C to 450°C
935-14-116	Temperature Range -100°C to 450°C
935-14-61	Temperature Range -50°C to 250°C
935-14-72	Temperature Range -50°C to 670°C
935-14-82	Temperature Range -50°C to 250°C
935-14-85	Temperature Range -50°C to 250°C
935-14-95H	Temperature Range -80°C to 670°C
935-14-95L	Temperature Range -200°C to 165°C
935-14-98	Temperature Range -50°C to 350°C

Calibration Option	UKAS Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties

Reference Probes - 90° Angled Semi Standard Platinum Resistance Thermometers
Includes carrying case

935-14-75	Temperature Range -50°C to 250°C
935-14-79	Temperature Range 0°C to 660°C

Calibration Option	UKAS Calibration available with Dry Block Calibrators refer to Calibration Price List for more information on temperature ranges and uncertainties

Termination Options - Example 935-14-61/BW; 935-14-75/DB

BW	Bare Wire will be supplied unless otherwise specified
TTI	Lemo Connector to suit TTI 1 to TTI10 (nett)
TTIb	Lemo Connector to suit TTI 22 (nett)
DB	Connector for Dry Block Calibrator Model (nett)





Reference Probes - Semi Standards Thermocouples


Temperature Range 0°C to 1300°C
935-14-91/R/300	Type R - Length 300mm, Includes Carrying Case
935-14-91/S/300	Type S - Length 300mm, Includes Carrying Case
935-14-88/R/300	Type R - Length 300mm, Includes Carrying Case
935-14-88/S/300	Type S - Length 300mm, Includes Carrying Case

Temperature Range 0°C to 1200°C
935-14-63/N/300	Type N - Length 300mm
935-14-64/N/300	Type N - Length 300mm
935-14-65/N/300	Type N - Length 300mm
935-14-66/N/500	Type N - Length 500mm
935-14-67/N/500	Type N - Length 500mm
935-14-68/N/500	Type N - Length 500mm

931-22-38	Carrying Case (nett)

Calibration Option	UKAS Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





Calibration Software



Cal Notepad	Permits connection of both an indicator and the calibration bath, view data on configurable chart displays, log data to file and control the bath

I Cal Easy	Can automatically calibrate up to 20 temperature sensors, calculate coefficients and print own design certificates

I Cal Easy Plus	Can automatically calibrate up to 20 temperature sensors, calculate coefficients and print own design certificates. Includes additional drivers for third party instruments. Before ordering consult Isotech.





Blackbody Sources - Blackbody Fixed Point Cells
Includes Certificate of Metal Analysis


Primary Standard Cells suitable for Medusa R
998-06-00A	Indium - Temperature Range 156.60°C
998-06-00B	Tin - Temperature Range 231.93°C
998-06-00C	Zinc - Temperature Range 419.53°C

Primary Standard Cells suitable for Oberon R
998-06-00D*	Aluminium - Temperature Range 660.32°C
998-06-00E*	Silver - Temperature Range 961.78°C
998-06-00G*	Copper - Temperature Range 1084.62°C

Medium Temperature "Hockey Puck" Cells suitable for Gemini R
431-03-00	Gallium - Temperature Range 29.7646°C (special to order)
976-05-00A	Indium - Temperature Range 156.60°C
976-05-00B	Tin - Temperature Range 231.93°C
976-05-00C	Zinc - Temperature Range 419.53°C

Medium Temperature "Hockey Puck" Cells suitable for Hyperion R
982-05-01	Gallium - Temperature Range 29.7646°C

High Temperature Cells suitable for Pegasus R
970-06-00A	Indium - Temperature Range 156.60°C
970-06-00B	Tin - Temperature Range 231.93°C
970-06-00C	Zinc - Temperature Range 419.53°C
970-06-00D*	Aluminium - Temperature Range 660.32°C
970-06-00E*	Silver - Temperature Range 961.78°C

Hazardous (consult Isotech)	Due to the hazardous nature of the Gallium, the cells are packed and shipped in accordance with IATA specifications

	* These cells are required to be surrounded by gas for protection at high temperatures - see Model 984





Gas Flow System - Model 984
Supplied with external power supply, 2 x connecting pipes and fittings


984	Gas Flow System





Blackbody Source - Hyperion R
Low Temperature Primary Source. 50mm diameter cavity, 0.995 emissivity. Includes 935-14-113/DB, Serial Communications and Cal Notepad Software.


982	Hyperion R
	Temperature Range -20°C to 125°C

Hockey Puck Cells
982-05-01	Gallium - Temperature Range 29.7646°C (special to order)

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz

Accessories
812-01-06	Set of 4 Orifice Plates to restrict cavity (40,30,20,10mm)
935-14-113/DB	Replacement Semi-Standard Probe -100°C to 250°C

UKAS Calibration Option	5 Point Calibration calibrating the units inbuilt indicator and supplied 935-14-113/DB against an Isotech laboratory contact thermometer (nett)

Hazardous (consult Isotech)	Due to the hazardous nature of the Gallium, the cells are packed and shipped in accordance with IATA specifications





Blackbody Source - Gemini R 550
Medium Temperature Primary Source. 65mm diameter cavity, 0.995 emissivity. Includes 935-14-72/DB, Serial Communications and Cal Notepad Software.


976	Gemini R 550
	Temperature Range 30°C - 550°C

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz

Hockey Puck Cells
431-03-00	Gallium - Temperature Range 29.7646°C (special to order)
976-05-00A	Indium - Temperature Range 156.60°C
976-05-00B	Tin - Temperature Range 231.93°C
976-05-00C	Zinc - Temperature Range 419.53°C

Accessories
976-01-05	Set of 5 Orifice Plates to restrict cavity (50,40,30,20,10mm)
935-14-72/DB	Replacement Semi-Standard Probe -50°C to 670°C
984	Gas Flow System

UKAS Calibration Option	5 Point Calibration calibrating the units inbuilt indicator and supplied 935-14-72/DB against an Isotech laboratory contact thermometer (nett)

Hazardous (consult Isotech)	Due to the hazardous nature of the Gallium, the cells are packed and shipped in accordance with IATA specifications





Blackbody Source - Pegasus R
High Temperature Primary Source. 20mm diameter cavity, 0.995 emissivity. Includes 935-14-115, Serial Communications and Cal Notepad Software.


970	Pegasus R
	Temperature Range 150°C - 1200°C

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz

High Temperature Cells
970-06-00A	Indium - Temperature Range 156.60°C
970-06-00B	Tin - Temperature Range 231.93°C
970-06-00C	Zinc - Temperature Range 419.53°C
970-06-00D*	Aluminium - Temperature Range 660.32°C
970-06-00E*	Silver - Temperature Range 961.78°C

Accessories
935-14-115	Replacement Semi-Standard Probe
970-05-01	Spare Insulation Pack for Blackbody Source (nett)
984	Gas Flow System

UKAS Calibration Option	5 Point Calibration calibrating the units inbuilt indicator and supplied 935-14-115 against an Isotech laboratory contact thermometer (nett)


	* These cells are required to be surrounded by gas for protection at high temperatures - see Model 984





Blackbody Source - Medusa R
Medium Temperature Primary Source. 45mm diameter cavity, 0.995 emissivity. Includes 935-14-95H, Serial Communications and Cal Notepad Software.


999	Medusa R
	Temperature Range 30°C - 550°C

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz

Primary Standard Cells
998-06-00A	Indium - Temperature Range 156.60°C
998-06-00B	Tin - Temperature Range 231.93°C
998-06-00C	Zinc - Temperature Range 419.53°C

Accessories
935-14-95H/DB	Replacement Semi-Standard Probe -80°C to 670°C
984	Gas Flow System

Calibration Option	UKAS Calibration available on request





Blackbody Source - Oberon R
High Temperature Primary Source. 50mm diameter cavity, 0.995 emissivity. Includes Serial Communications and Cal Notepad Software.


426	Oberon R
	Temperature Range 450°C - 1100°C

Voltage supply	100V – 50/60Hz

Primary Standard Cells
998-06-00D*	Aluminium - Temperature Range 660.32°C
998-06-00E*	Silver - Temperature Range 961.78°C
998-06-00G*	Copper - Temperature Range 1084.62°C

Accessories
935-19-63	Isolation Transformer to allow operation from 240V supply (nett)
935-19-71	Isolation Transformer to allow operation from 220V supply (nett)
984	Gas Flow System

Calibration Option	UKAS Calibration available on request

	* These cells are required to be surrounded by gas for protection at high temperatures - see Model 984





Blackbody Source - Cyclops
BB Source 878-01 with thermocouple access hole at 90° to main aperture. Includes 935-14-131 Type R Control Thermocouple, Serial Communications and Cal Notepad Software.


878	Cyclops
	Temperature Range 100°C to 1300°C

Voltage supply	208/240V – 50/60Hz
	100/130V – 50/60Hz

Aperture Hole	45mm aperture hole (please specify)
	17mm aperture hole (please specify)

Special to order	BB Source 878-01A with thermocouple access hole at rear - in view from aperture (please specify)

Accessories
878-02-08	Standard Equalising Block - 4 x 8mm x 4 x 6mm i.d. - 180mm leg length
878-01	Replacement BB Source with thermocouple access hole at 90° to main aperture - hidden from aperture view
878-01A	Replacement BB Source with thermocouple access hole at rear - in view from aperture
935-14-130	Control Thermocouple for use with equalising block or standard for Blackbody Source
935-14-131	Replacement Control Thermocouple Type R





Blackbody Source - Model 988
Includes 3 point traceable certificate


988	Thermal Image and Infrared Calibration Source
	Temperature Range 20°C to 45°C

Voltage supply	Switch Mode Power Supply supplied as standard
	100-240VAC

Calibration Option	Traceable 3 Point Re-Calibration (nett)





Blackbody Source - Model 989
Includes 3 point traceable certificate


989	Thermal Image and Infrared Calibration Source
	Temperature Range 20°C to 50°C

	Quantity 1 off
	Quantity 2 to 4 off
	Quantity 5 to 25 off

Voltage supply	Switch Mode Power Supply supplied as standard
	100-240VAC

Calibration Option	Traceable 3 Point Re-Calibration (nett)

Accessories
935-16-112	RS422 to RS232 Converter Lead (nett)
989/02	Short Extension Tube - 40mm (nett)
989/03	Long Extension Tube - 210mm (nett)

Semi-Standard PRT
935-14-82/BW	Semi Standard PRT - Temperature Range -50°C to 250°C
UKAS	3 Point calibration of 935-14-82/BW (nett)

Calibration Kit 989/01	Comprising of…
Calibration Kit 989/01	TTI-10 Handheld Thermometer
	935-14-82/TTI Semi Standard PRT - Temperature Range -50°C to 250°C
	3 Point System Calibration of TTI-10 + 935-14-82/TTI over the range 0°C to 50°C, uncertainty 0.02°C (20mK) (nett)





Greybody Source - Model 975
Portable, lightweight temperature source


975	Greybody Source
	Temperature Range 50°C to 350°C

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz





Blackbody Source - QuickCal Blackbody
For rapid and portable checking of infrared thermometers


550-02	Quick-Cal Blackbody
	Temperature Range 30°C to 350°C

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz
	Farhenheit operation available
Accessories
931-22-100	Carrying Case (nett)

Calibration Option	Traceable 5 Point Re-Calibration (nett)





Thermocouple Probes - Cold Junction
Mulit-Junction Probes for Compensation Units. Standard Length 1 Meter.


880 S	Single Junction (per thermocouple type)
880 D	Double Junction (per thermocouple type)

On ordering please advise the following

Specify	Number of Junctions Required
Select from Thermocouple Type	K, T, J, E,N, U (compensating for Type R or S unless otherwise specified)
Noble Metal	Type R or S (additional cost - consult Isotech)
Advise	Length of Probe required (L1)
	Length of Lead required (L2)
	Maxiumum Probe Diameter
For use with	ie, Zeref…..

Additional length	Per meter (nett)


UKAS Calibration Option	880 Calibration 1st Junction (nett)
	Subsequent Junctions when calibrated at the same time (nett per junction)





Thermocouple Reference Unit - TRU Model 938
References up to 100 thermocouples. Thermocouples not included.
Normally uniquely specified for each order. Before ordering please consult Isotech.


938/36	TRU 938/36
	For up to 36 thermocouples
	Temperature Range 0°C (or 45°C to 70°C)
	(B1) 6 pockets x 6.2mm plus 1 x 4.2mm standard probe pocket x 130mm deep

938/100	TRU 938/100
	For up to 100 thermocouples
	Temperature Range 0°C (or 45°C to 70°C)
	(B2) 8 pockets x 8.2mm plus 1 x 4.2mm standard probe pocket x 76mm

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz

Accessories
935-14-54	Optional PRT to suit block (B1). Includes UKAS Calibration at 0.01°C
935-14-55	Optional PRT to suit block (B2). Includes UKAS Calibration at 0.01°C
935-17-32	Fan Filter

	The alarm is a single pole relay, not a change over contact. Default setting is open at set temperature, closed when the temperature deviates by ±0.2°C from 0°C. For alarm contacts closed at 0°C and opening on alarm please specify.





Thermocouple Reference Unit - TRU Model 937
References up to 100 thermocouples. Thermocouples not included.
Normally uniquely specified for each order. Before ordering please consult Isotech.


937/50	TRU 937/50
	For up to 50 thermocouples
	Temperature Range 0°C (or 45°C to 70°C)
	(B2) 8 pockets x 8.2mm plus 1 x 4.2mm standard probe pocket x 76mm

937/100	TRU 937/100
	For up to 100 thermocouples
	Temperature Range 0°C (or 45°C to 70°C)
	(B2) 8 pockets x 8.2mm plus 1 x 4.2mm standard probe pocket x 76mm

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz

Accessories
935-14-55	Optionally fitted PRT to suit block (B2). Includes UKAS Calibration at 0.01°C
935-17-32	Fan Filter

Specify Thermocouple type and quantity	Double Junction Thermocouples include input and output screw terminal connectors (Klippon)

Select from Thermocouple Type	K, T, J, E,N, U (compensating for Type R or S unless otherwise specified) (per thermocouple type)
Noble Metal	Type R or S (additional cost - consult Isotech)
Specify	Number of Junctions Required

	The alarm is a single pole relay, not a change over contact. Default setting is open at set temperature, closed when the temperature deviates by ±0.2°C from 0°C. For alarm contacts closed at 0°C and opening on alarm please specify.





Thermocouple Reference Unit - TRUrac Model 847
References up to 100 thermocouples. Thermocouples not included.
Normally uniquely specified for each order. Before ordering please consult Isotech.


847	TRUrac 847
	For up to 100 thermocouples
	Temperature Range 0°C (or 45°C to 70°C)

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz

Accessories
935-14-54	Optionally fitted PRT to suit block (B2). Includes UKAS Calibration at 0.01°C
935-17-32	Fan Filter
	Encased Unit

Specify Thermocouple type and quantity	Double Junction Thermocouples includes input and output screw terminal connectors (Klippon)

Select Thermocouple Type	K, T, J, E, U, N (U compensating for type R and S unless otherwise specified) (per thermocouple type)
Noble Metal	Type R or S (additional cost - consult Isotech)
Specify	Number of Junctions Required

	The alarm is a single pole relay, not a change over contact. Default setting is open at set temperature, closed when the temperature deviates by ±0.2°C from 0°C. For alarm contacts closed at 0°C and opening on alarm please specify.





Thermocouple Reference Unit - Hotbox Model 830
References up to 200 thermocouples. Thermocouples not included.
Normally uniquely specified for each order. Before ordering please consult Isotech.


830	Hotbox 830
	For up to 200 thermocouples
	Temperature Range 45°C to 70°C

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz

Accessories
935-14-08	Optionally fitted PRT to suit block. Includes UKAS Calibration at 0.01°C
935-14-08	Optionally fitted PRT to suit block. Includes UKAS Calibration at 0.01°C, 50°C and 75°C

Specify Thermocouple type and quantity	Double Junction Thermocouples includes input and output screw terminal connectors (Klippon)

Select Thermocouple Type	K, T, J, E, U, N (U compensating for type R and S unless otherwise specified) (per thermocouple type)
Noble Metal	Type R or S (additional cost - consult Isotech)
Specify	Number of Junctions Required





Thermocouple Reference Unit - Isobox Model 842
References up to 100 thermocouples. Thermocouples not included.
Normally uniquely specified for each order. Before ordering please consult Isotech.


842	Isobox 842
	For up to 100 thermocouples
	Temperature Range -20°C to 70°C

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz
	24VDC
	Other special to order (consult Isotech)

Accessories
935-14-08	Optionally fitted PRT to suit block. Includes UKAS Calibration at 0.01°C

Specify block sensor type
Type of isothermal block sensor - maximum 4, 1 included as standard

Select Thermocouple Type	K, T, J, E, U, N (U compensating for type R and S unless otherwise specified)

Specify Thermocouple type and quantity	Double Junction Thermocouples includes input and output screw terminal connectors (Klippon)

Select Thermocouple Type	K, T, J, E, U, N (U compensating for type R and S unless otherwise specified) (per thermocouple type)
Noble Metal	Type R or S (additional cost - consult Isotech)
Specify	Number of Junctions Required





Thermocouple Reference Unit - ISOrac Model 844
References up to 100 thermocouples. Thermocouples not included.
Normally uniquely specified for each order. Before ordering please consult Isotech.


844/50	Isorac 844/50
	For up to 50 thermocouples
	Temperature Range -20°C to 70°C

844/100	Isorac 844/100
	For up to 100 thermocouples
	Temperature Range -20°C to 70°C

Voltage supply	100/130V – 50/60Hz
	208/240V – 50/60Hz
	24VDC
	Other special to order (consult Isotech)

Accessories
935-14-08	Optionally fitted PRT to suit block. Includes UKAS Calibration at 0.01°C

Specify block sensor type
Type of isothermal block sensor - maximum 4, 1 included as standard

Select Thermocouple Type	K, T, J, E, U, N (U compensating for type R and S unless otherwise specified)

Specify Thermocouple type and quantity	Double Junction Thermocouples include input and output screw terminal connectors (Klippon)

Select Thermocouple Type	K, T, J, E, U, N (U compensating for type R and S unless otherwise specified) (per thermocouple type)
Noble Metal	Type R or S (additional cost - consult Isotech)
Specify	Number of Junctions Required


Jarrett-Isotech Range Water Triple Point Cells
With Certificate of Conformity

Borosilicate
A11/50/270	Temperature, 0.01°C
A13/50/270	Temperature, 0.01°C
B11/50/270	Temperature, 0.01°C
B11/65/270	Temperature, 0.01°C
B13/65/270	Temperature, 0.01°C
B16/65/270	Temperature, 0.01°C

Quartz
A11/50/270Q	Temperature, 0.01°C
B11/50/270Q	Temperature, 0.01°C
B11/65/270Q	Temperature, 0.01°C

Isotech Water Triple Point Cells
With Certificate of Conformity

B8/30/130	Temperature, 0.01°C
B12/40/210	Temperature, 0.01°C
B12/46/210	Temperature, 0.01°C

Calibration Option	Traceable and UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





Maintenance Bath Water Triple Point
For the maintenance of 1 to 4 Water Triple Point Cells


18233	Water Triple Point Maintenance Bath
	Temperature Range 0.01°C

Voltage Supply	100/130V – 50/60Hz
	208/240V – 50/60Hz


Specify	Please specify which type of Triple Point of Water Cell will be used so that we can supply the correct cell holder





Ice Mantle Maker Water Triple Point
For use with Large Water Triple Point Cells. Includes 1 x Ice Bridge Prevention Collar


452	Ice Mantle Maker

Accessories
451-01-04	Additional Ice Bridge Prevention Collar


Specify	Ice Bridge Prevention Collars are manufactured to suit the cell in use, please specify the following:

	Cell Type
	Outside Diameter of Water Triple Point Cell (mm)
	Depth from shoulder of Cell to water level (mm)





Sostmann-Isotech Gallium Cell Sealed
Includes Certificate of Conformity


17401	Sostmann-Isotech Gallium Cell
	Temperature Range 29.7646°C


Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties


Hazardous (consult Isotech)	Due to the hazardous nature of the Gallium, the cells are packed and shipped in accordance with IATA specifications





Apparatus Gallium
For the realization and maintenance of the Gallium Cell automatically


17402B	Gallium Apparatus
	Temperature Range 29.7646°C

Voltage Supply	100/130V – 50/60Hz
	208/240V – 50/60Hz





Isotech Mercury Cell
Includes Certificate of Conformity


17724	Mercury Triple Point Cell
	Temperature Range -38.8344°C


Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties


Hazardous (consult Isotech)	Due to the hazardous nature of the Mercury the cells are packed and shipped in accordance with IATA specifications





Apparatus Mercury Triple Point Model
A cryostat to realise the Triple Point of Mercury


17725	Mercury Triple Point Apparatus
	Temperature Range -36°C to -42°C

Voltage Supply	208/240V – 50Hz
	208/240V – 60Hz





Triple Point Apparatus Simple Argon
For the realisation of the Argon Triple Point

471	Triple Point Apparatus Simple Argon
	Temperature Range -189.3442°C



Hazardous (consult Isotech)	Due to the hazardous nature of the Argon the apparatus is packed and shipped in accordance with IATA specifications





Fixed Point Cells Optimal - SEALED
99.9999% Pure. Includes Certificate of Conformity

QUARTZ Clad Sealed Fixed Point Cells
Require to be hand carried
17668	Indium 156.5985°C
17669	Tin 231.928°C
17671	Zinc 419.527°C
17672	Aluminum 660.323°C
17673	Silver 961.78°C
17674	Copper 1084.62°C

METAL Clad Sealed Fixed Point Cells
Transportable
17668MO	Indium 156.5985°C
17669MO	Tin 231.928°C
17671MO	Zinc 419.527°C
17672MO	Aluminum 660.323°C

Accessories	Basket and heat shunts are required for the cells when used with Isotech Furnaces
Basket Assemblies for Isotech furnaces (excluding 465)
410-07-01 Type B	Optimal Cell Basket Assembly - Indium, Tin (nett)
410-07-01 Type B	Optimal Cell Basket Assembly - Zinc (nett)
410-07-01 Type B	Optimal Cell Basket Assembly - Aluminium, Silver, Copper (nett)
Basket Assemblies for Isotech 465 only
465-04-02	Optimal Cell Basket Assembly for Tin and Zinc (nett)
465-04-01	Optimal Cell Basket Assembly - Aluminium, Silver, Copper (nett)

Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties

Hand Carry Recommendation	Quartz Cells require to be hand carried however due to hand carry restrictions imposed by the airlines this may not be possible. For more information regarding hand carry please consult with Isotech.





Fixed Point Cells Optimal - OPEN
99.9999% Pure. Includes Certificate of Conformity

QUARTZ Open Fixed Point Cell
Transportable
17668QCO	Indium 156.5985°C
17669QCO	Tin 231.928°C
17671QCO	Zinc 419.527°C
17672QCO	Aluminum 660.323°C
17673QCO	Silver 961.78°C
17674QCO	Copper 1084.62°C

For Quartz Open Fixed Point Cells only please specify length required

Design type A	Crucible Length 460mm ±2mm
	Re-Entrant Length 450mm ±2mm
Design type B	Crucible Length 520mm ±2mm
	Re-Entrant Length 510mm ±2mm
Design type C	Crucible Length 620mm ±2mm
	Re-Entrant Length 610mm ±2mm

METAL Open Fixed Point Cell
Transportable
17668MCO	Indium 156.5985°C
17669MCO	Tin 231.928°C
17671MCO	Zinc 419.527°C
17672MCO	Aluminum 660.323°C

Sostmann-Isotech Gallium Cell
99.99999% Pure. Includes Certificate of Conformity

METAL Open Fixed Point Cell
17401 (0)	Sostmann-Isotech Gallium Cell 29.7646°C

Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties

Hazardous (consult Isotech)	Due to the hazardous nature of the Gallium the cells are packed and shipped in accordance with IATA specifications





Furnaces - Dual
For operation from Indium to Copper Fixed Points
Includes 425-06-01 gantry holder for thermometers


17707	Low Temperature Dual Furnace
	Temperature Range 125°C to 250°C
	For Indium and Tin Fixed Points

Voltage Supply	108/115V – 50/60Hz
	208/240V – 50/60Hz

17706	High Temperature Dual Furnace
	Temperature Range 400°C to 1000°C
	For Zinc, Aluminium and Silver Fixed Points

Voltage Supply	110V – 50/60Hz
	230V – 50/60Hz

17705	Very High Temperature Dual Furnace
	Temperature Range 500°C to 1090°C
	For Aluminium, Silver and Copper Fixed Points

Voltage Supply	110V – 50/60Hz
	230V – 50/60Hz

Accessories
420-02-15	Inconel Equalising Block (17705, 17706)
410-02-18	Aluminium Equalising Block (17707)
824-01-00	Fan Assembly to cool thermometer handle
425-06-01	Gantry Holder for Thermometers





Furnaces - Heat Pipe
For operation from Indium to Copper Fixed Points
Includes 425-06-01 gantry holder for thermometers


17702W	Low Temperature Heat Pipe Furnace
	Temperature Range 125°C to 250°C
	For Indium and Tin Fixed Points

Voltage Supply	108/115V – 50/60Hz
	208/240V – 50/60Hz

17702P	High Temperature Heat Pipe Furnace
	Temperature Range 400°C to 1000°C
	For Zinc, Aluminium and Silver Fixed Points

Voltage Supply	110V – 50/60Hz
	230V – 50/60Hz

17702S	Very High Temperature Heat Pipe Furnace
	Temperature Range 500°C to 1090°C
	For Aluminium, Silver and Copper Fixed Points

Voltage Supply	110V – 50/60Hz
	230V – 50/60Hz

Accessories
420-02-15	Inconel Equalising Block (17702P, 17702S)
410-02-18	Alunimium Equalising Block (17702W)
824-01-00	Fan Assembly to cool thermometer handle
411-01-11B	Annealing Adaptor
425-06-01	Gantry Holder for Thermometers





Furnaces - Low Temperature
For Indium, Tin and Zinc Fixed Points
Includes 425-06-01 gantry holder for thermometers


17701	Low Temperature Furnace Model
	Temperature Range 50°C to 500°C

Accessories
824-01-00	Fan Assembly to cool thermometer handle
411-01-11	Annealing Adaptor
425-06-01	Gantry Holder for Thermometers

Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz





Furnaces - Medium Temperature
For Indium, Tin, Zinc and Aluminium Fixed Points
Includes 425-06-01 gantry holder for thermometers


17703	Medium Temperature Furnace Model
	Temperature Range 50°C to 700°C

Accessories
824-01-00	Fan Assembly to cool thermometer handle
411-01-11B	Annealing Adaptor
420-02-14	Aluminium Bronze Equalising Block
425-06-01	Gantry Holder for Thermometers

Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz





Furnaces - 3 Zone High Temperature
For Zinc, Aluminium, Silver, Gold and Copper Fixed Points
Includes 425-06-01 gantry holder for thermometers


465	3 Zone High Temperature Furnace
	Temperature Range 250°C to 1200°C

Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz

Accessories	Basket and heat shunts are required for the cells when used with Isotech Furnaces
465-04-02	Optimal Cell Basket Assembly for Tin and Zinc (nett)
465-04-01	Optimal Cell Basket Assembly for Aluminium, Silver and Copper (nett)
465-02-06	Ceramic Equalising Block
425-06-01	Gantry Holder for Thermometers





Furnaces - Annealing
For the pre-warming, annealing and cool down of SPRTS


414	Annealing Furnace
	Ambient to 1000°C with single ramp to set point

Voltage Supply	110V – 50/60Hz
	240V – 50/60Hz





Primary SPRT - 670/25.5Ω
Includes traceable certificate at Rtpw and Wga and carrying case

Quartz
670SQ/25.5Ω	Temperature Range -200°C to 670°C
	Length 480mm
	Length 650mm
Metal
670SH/25.5Ω	Temperature Range -80°C to 670°C
	Length 480mm
	Length 650mm
Metal
670SL/25.5Ω	Temperature Range -200°C to 165°C
	Length 480mm


Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties

Hand Carry Recommendation	We recommend that these thermometers are hand carried where possible


Model 992 SPRT Extension Lead
For Isotech SPRTS, includes LEMO connector


992	Standard Length 10M

Additional Length	per meter

Note	On ordering an 992 extension lead at the same time as an SPRT the LEMO connector will be fitted to the SPRT.





Primary SPRT - 96178/0.25Ω
Includes traceable certificate at Rtpw and Wga and carrying case

Quartz
96178/0.25Ω	Temperature Range 0°C to 1000°C
	Length 650mm


Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties

Hand Carry Recommendation	We recommend that these thermometers are hand carried where possible


Model 992 SPRT Extension Lead
For Isotech SPRTS, includes LEMO connector


992	Standard Length 10M

Additional Length	per meter

Note	On ordering an 992 extension lead at the same time as an SPRT the LEMO connector will be fitted to the SPRT.





Copper Point SPRT Model 108462
Includes traceable certificate at Rtpw and Wga and carrying case


Model 108462	Temperature Range 0°C to 1100°C
	Length 650mm
	Includes 416 Protection Device


Model 992 SPRT Extension Lead
For Isotech SPRTS, includes LEMO connector


992	Standard Length 10M

Additional Length	per meter

Note	On ordering an 992 extension lead at the same time as an SPRT the LEMO connector will be fitted to the SPRT.





Working SPRT - 909/25.5Ω
Includes traceable certificate at Rtpw and Wga and carrying case

Quartz
909Q/25.5Ω	Temperature Range -200°C to 670°C
	Length 480mm
	Length 550mm
	Length 600mm
Metal
909H/25.5Ω	Temperature Range -80°C to 670°C
	Length 480mm
	Length 550mm
	Length 600mm
Metal
909L/25.5Ω	Temperature Range -200°C to 165°C
	Length 480mm
	Length 550mm
	Length 600mm


Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties

Hand Carry Recommendation	We recommend that these thermometers are hand carried where possible


Model 992 SPRT Extension Lead
For Isotech SPRTS, includes LEMO connector


992	Standard Length 10M

Additional Length	per meter

Note	On ordering an 992 extension lead at the same time as an SPRT the LEMO connector will be fitted to the SPRT.





Working SPRT - 909/100Ω
Includes traceable certificate at Rtpw and Wga and carrying case

Quartz
909Q/100Ω	Temperature Range -200°C to 550°C
	Length 480mm
	Length 550mm
	Length 600mm
Metal
909H/100Ω	Temperature Range -80°C to 550°C
	Length 480mm
	Length 550mm
	Length 600mm
Metal
909L/100Ω	Temperature Range -200°C to 165°C
	Length 480mm
	Length 550mm
	Length 600mm


Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties

Hand Carry Recommendation	We recommend that these thermometers are hand carried where possible


Model 992 SPRT Extension Lead
For Isotech SPRTS, includes LEMO connector


992	Standard Length 10M

Additional Length	per meter

Note	On ordering an 992 extension lead at the same time as an SPRT the LEMO connector will be fitted to the SPRT.





CUSTOMER: ORDER NO:


Thermocouple Standards - Platinum/Palladium
Manufactured by National Physical Laboratory (NPL)
NPL UKAS Calibration included - select from 3 calibration ranges available


NPL Pt/Pd T/C	Temperature Range 0°C to 1500°C
	7 x 700mm outer ceramic sheath with cold junction

Calibration Option	Please select from 1 of the 3 following calibration ranges available

0°C to 1100°C	Uncertainty of ±0.2°C Calibrated at Fixed Points Zn, Ag and Cu

0°C to 1330°C	Uncertainty of ±0.2°C from 0°C to 1100°C rising linearly to ±0.55°C at 1330°C Calibrated at Fixed Points Zn, Ag and Co-C

0°C to 1500°C	Uncertainty of ±0.2°C from 0°C to 1100°C rising linearly to ±0.7°C at 1500°C Calibrated at Fixed Points Zn, Ag and Pd-C





Thermocouple Homogeneity Scanner 881
Dual Heat Pipe Thermocouple Homogeneity Scanner


Model 881	Thermocouple Homogeneity Scanner


Voltage Supply	100/130V – 50/60Hz
	208/240V – 50/60Hz





Thermocouple Standards - Platinum/Platinum Rhodium
Includes 4 point UKAS Calibration up to 1100°C

With Cold Junction
1600 Type R	Temperature Range 0°C to 1600°C
	Length 300mm
	Length 600mm

1600 Type S	Temperature Range 0°C to 1600°C
	Length 300mm
	Length 600mm

Without Cold Junction
1600 Type R	Temperature Range 0°C to 1600°C
	Length 300mm
	Length 600mm

1600 Type S	Temperature Range 0°C to 1600°C
	Length 300mm
	Length 600mm

Calibration Option
UKAS	Calibration available up to 1300°C (additional nett)
NPL - 0°C to 1330°C	Uncertainty of ±0.3°C from 0°C to 1100°C rising linearly to ±0.55°C at 1330°C (additional nett) Calibrated at Fixed Points Zn, Ag and Co-C (additional nett)
NPL - 0°C to 1500°C	Uncertainty of ±0.3°C from 0°C to 1100°C rising linearly to ±0.7°C at 1500°C (additional nett) Calibrated at Fixed Points Zn, Ag and Pd-C (additional nett)





Thermocouple Standards - Gold/Platinum
Includes Carrying Case


1000	Temperature Range 0°C to 1000°C
	With Traceable Calibration at Rtpw and FP Zinc, Aluminium and Silver

1000	Temperature Range 0°C to 1000°C
	With NPL UKAS Calibration at FP Zinc, Aluminium and Silver, uncertainty: 0°C-400°C ±0.07°C, 400°C-1000°C ±0.05°C





Precision Thermometer - microK
For use with SPRTs, Thermistors and Thermocouples
Includes UKAS Calibration


864a	microK GOLD

864a	microK 70

864a	microK 125

910a	microK 250

910a	microK 500


Channel Expander - microsKanner
10 Channel Scanner, expandable up to 90 channels


913	microsKanner


Voltage Supply	Universal power supply allows operation from 90 to 240V 50/60Hz





Resistance Bridge Calibrator RBC 100 & RBC 400
Includes software for analysis and certificate printing

RBC Manual Version
924-01-01	RBC 100 (M)
	Optimised for 25.5Ω Thermometry

924-01-02	RBC 400 (M)
	Optimised for 100Ω Thermometry

RBC Automatic Version
920-01-01	RBC 100 (A) includes carrying case
	Optimised for 25.5Ω Thermometry

920-01-02	RBC 400 (A) includes carrying case
	Optimised for 100Ω Thermometry





True Temperature Indicator - TTI 22
Includes Cal Notepad Software for monitoring and logging, RS232 Cable and 2 Lemo Connectors to suit


926	True Temperature Indicator TTI 22
	Temperature Range -250°C to 962°C

Selector Switch
954	8 Way Selector Switch for PRT's

Semi Standard Pt100's	Include Carrying Case and Lemo Connector suitable for use with TTI 22
935-14-13/TTIb	Temperature Range -196°C to 250°C
935-14-16/TTIb	Temperature Range -100°C to 450°C
935-14-61/TTIb	Temperature Range -50°C to 250°C
935-14-72/TTIb	Temperature Range -50°C to 670°C
935-14-95H/TTIb	Temperature Range -80°C to 670°C
935-14-95L/TTIb	Temperature Range -200°C to 165°C

Working SPRT's	Include Carrying Case and Lemo Connector suitable for use with TTI 22
Metal Clad 909L/100Ω/TTIb	Temperature Range -200°C to 165°C
	Length 480mm
Quartz Clad 909Q/100Ω/TTIb	Temperature Range -200°C to 550°C
	Length 480mm

Accessories
956/TTI 22	Terminal Adaptor
931-22-106	Carrying Case (nett)

Voltage Supply	Universal power supply allows operation from 90 to 240V 50/60Hz

Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





milliK Precision Thermometer
Includes Cal Notepad Software for monitoring and logging, RS232 Cable, 2 Lemo Connectors to suit and traceable certificate


923	milliK Precision Thermometer
	Temperature Range -270°C to 1820°C
Semi Standard Pt100's	Include Carrying Case and fitted Lemo Connector
935-14-13/TTI	Temperature Range -196°C to 250°C
935-14-16/TTI	Temperature Range -100°C to 450°C
935-14-116/TTI	Temperature Range -100°C to 450°C
935-14-61/TTI	Temperature Range -50°C to 250°C
935-14-72/TTI	Temperature Range -50°C to 670°C
935-14-95H/TTI	Temperature Range -80°C to 670°C
935-14-95L/TTI	Temperature Range -200°C to 165°C
Working SPRT's	Includes Carrying Case and fitted Lemo Connector
Metal Clad 909L/100Ω/TTI	Temperature Range -200°C to 165°C - Length 480mm
Quartz Clad 909Q/100Ω/TTI	Temperature Range -200°C to 550°C - Length 480mm
Accessories
956	Terminal Adaptor
931-22-102	Carrying Case (nett)
Voltage Supply	Universal power supply allows operation from 90 to 240V 50/60Hz

SYSTEM CALIBRATION
Only applicable when millik and semi-standard probe purchased at same time
Temperature Range	Calibration Points/Typical Uncertainty
-196°C to 232°C	-196°C (±0.030°C), -38.8°C (±0.015°C), 0.01°C (±0.015°C), 156°C (±0.025°C),232°C (±0.025°C)
-196°C to 29.76°C	-196°C (±0.030°C), -38.8°C (±0.015°C), 0.01°C (±0.015°C), 29.76°C (±0.015°C)
-50°C to 250°C	-50°C (±0.025°C), 0.01°C (±0.015°C), 29.76°C (±0.015°C), 156°C (±0.025°C), 250°C (±0.030°C)
-80°C to 419°C	-80°C (±0.030°C), -38.8°C (±0.015°C), 0.01°C (±0.015°C), 232°C (±0.025°C), 419°C (±0.040°C)
0.01°C to 419°C	0.01°C (±0.015°C), 232°C (±0.025°C), 419°C (±0.040°C)
-80°C to 660°C	-80°C (±0.030°C), -38.8°C (±0.015°C), 0.01°C (±0.015°C), 232°C (±0.025°C), 419°C (±0.040°C), 660°C (±0.050°C)
0.01°C to 660°C	0.01°C (±0.015°C), 232°C (±0.025°C), 419°C (±0.040°C), 660°C (±0.050°C)
350°C to 1100°C	350°C (±0.8°C), 600°C (±0.8°C), 850°C (±0.8°C), 1100°C (±0.8°C)
350°C to 1300°C	350°C (±0.8°C), 700°C (±0.8°C), 1000°C (±0.8°C), 1300°C (±1.8°C)
ADDITIONAL SYSTEM CALIBRATION OPTIONS - Applicable when millik and semi-standard probe purchased at same time
Temperature Range	Calibration Points/Typical Uncertainty
0.01°C to 156°C	0.01°C (0.01°C), 156°C (0.015°C)
-38°C to 29.7646°C	-38°C (0.015°C), 0.01°C (0.01°C), 29.76°C (0.01°C)
*See Brochure - MILLIK HIGH ACCURACY TEMPERATURE MEASUREMENT






millisKanner Channel Expander
Eight Channel Expansion Unit for milliK, maximum of four units per milliK


914a	millisKanner Channel Expander (first unit)
	Includes following cables suitable for connecting milliK to millisKanner
932-42-33	Universal Power Suply allows operation from 90 to 240V 50/60Hz (suitable to power up to 4 millisKanners)
914-03-02	Digital Connecting Cable
914-02-02	milliK to millisKanner linking cable


914b	millisKanner Channel Expander (subsequent)
	Includes following cables suitable for connecting millisKanner to milliskanner
914-02-03	DC Link Cable (Univeral PSU not required)
914-03-02	Digital Connecting Cable
914-02-04	millisKanner to millisKanner linking cable





AC/DC Standard Resistors - SRA & SRB
Includes Calibration Certificate (3ppm)
On ordering advise temperature Resistor is to be set at


SRA	1Ω
SRA	10Ω
SRA	25Ω
SRA	100Ω
SRA	400Ω

SRB	1,000Ω
SRB	10,000Ω


Calibration Option
UKAS	From ±0.3ppm (nett)
UKAS	SRA 1Ω/5Ω <±0.09ppm (nett)
UKAS	SRA 10Ω/25Ω/100Ω <±0.08ppm (nett)
UKAS	SRA 400Ω <±0.1ppm (nett)





Resistor Maintenance Bath
Will house several resistors, please specify number and type


455	Resistor Maintenance Bath
	Temperature Range Dew Point to above 40°C

Accessories
932-19-72	SR Oil - 35 Litres required (per Litre)


Voltage Supply	100/130V – 50/60Hz
	208/240V – 50/60Hz





Temperature Controlled AC/DC Resistors - Model 456



456	TCFR 10Ω
456	TCFR 25Ω
456	TCFR 100Ω
456	TCFR 1,000Ω
456	TCFR 10,000Ω


Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





Boiling Point Apparatus - Nitrogen
May be adapted for use with liquid argon


18205	Boiling Point Apparatus Nitrogen
	Temperature Range -185°C to -196°C nominal





CUSTOMER: ORDER NO:


Simple Liquid Nitrogen Apparatus
Liquid Nitrogen not included and must be sourced locally


461	Simple Liquid Nitrogen Apparatus
	Nominal Temperature Range -196°C





CUSTOMER: ORDER NO:


Cryostat Model 459
Liquid Nitrogen not included and must be sourced locally


459	Cryostat
	Temperature Range -80°C to -180°C

Accessories
459-01-01	Hand Vacuum Pump (nett)
459-01-02	Electric Vacuum Pump (nett)
459-01-03	35 Litre Cryostat Container (nett)
459-01-04	25 Litre Container for topping up (nett)
459-02-13	Fill Tube Assembly





Stirred Liquid Baths - 915 Parallel Tube
With Eurotherm Controller 0.01°C to 0.1°C resolution, Serial Communications and Cal Note Pad Software.


915H	No Chiller Supplied
	Temperature Range 30°C to 300°C
Voltage Supply	110V – 50/60Hz
	240V – 50/60Hz

915MWE	Supplied with 1 stage wide range chiller
	Temperature Range -30°C to 40°C
Voltage Supply	110V – 50Hz
	110V – 60Hz
	240V – 50Hz
	240V – 60Hz

915LW	Supplied with 2 stage wide range chiller
	Temperature Range -65°C to 40°C
Voltage Supply	110V – 50Hz
	110V – 60Hz
	240V – 50Hz
	240V – 60Hz

Accessories
915/01a	Aluminium Equalising Block
915/01b	Copper Equalising Block
915/02	Liquid in Glass Thermometer Support Kit
915/03	Monocular and Support
915/05	Calibration Tube Cover and Equalising Block Support
796-05-03	Thermometer Stand Kit

915/07	Medium Silicon Oil 40°C to 180°C (per Litre)
915/08	High Silicon Oil 150°C to 250°C (per Litre)
915/09	Very High Silicon Oil 40°C to 288°C (per Litre)

915/D	Increased Depth Calibration Tube Assembly
915/E	High Stability Controller (nett)

	7 Litres Oil Required per Liquid Bath





Stirred Liquid Baths - 785 Parallel Tube
With Eurotherm Controller 0.01°C resolution over full range, Serial Communications and Cal Note Pad Software.


785H	Temperature Range 30°C to 300°C

785M	Temperature Range -40°C to 125°C

785L	Temperature Range -80°C to 125°C

Voltage Supply	110V – 50/60Hz
	240V – 50/60Hz

Accessories
915/01a	Aluminium Equalising Block
915/01b	Copper Equalising Block
785-02	Liquid in Glass Thermometer Support Kit
796-03	Monocular and Support
796-05-03	Thermometer Stand Kit
785-02-20	Blackbody Assembly
785-05-01	A11-50 Water Triple Point Cell Kit

915/07	Medium Silicon Oil 40°C to 180°C (per Litre)
915/08	High Silicon Oil 150°C to 250°C (per Litre)
915/09	Very High Silicon Oil 40°C to 288°C (per Litre)



	8½ Litres Oil Required per Liquid Bath





Stirred Liquid Baths - Accessories for 785 and 915



Fixed Point Calibration ITS-90 Cell Basket Assemblies

915-05-43	Small Mercury Cell Kit (nett)
915-05-44	Large Mercury Cell Kit (nett)
915-05-41	Small Water Triple Point Cell Kit (nett)
915-05-40	Large Water Triple Point Cell Kit (nett
915-05-38	Large Gallium Cell Kit (nett
915-05-39	Small Gallium Cell Kit (nett)
915-05-42	Slim Cell Kit (nett)

Chiller Options

915/10	Single Stage Wide Range Chiller
	Temperature Range -30°C to 40°C

Voltage Supply	110V – 50Hz (nett)
	110V – 60Hz (nett)
	240V – 50Hz (nett)
	240V – 60Hz (nett)

915/11	Dual Stage Wide Range Chiller
	Temperature Range -65°C to 40°C

Voltage Supply	110V – 50Hz (nett)
	110V – 60Hz (nett)
	240V – 50Hz (nett)
	240V – 60Hz (nett)





Stirred Liquid Baths - Orion
With Eurotherm Controller 0.01°C to 0.1°C resolution, Lid Accessory, Serial Communications and Cal Note Pad Software.


796H	Temperature Range 30°C to 300°C

796M	Temperature Range -40°C to 125°C

796L	Temperature Range -80°C to 125°C

Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz

Accessories
796-05-02	Spare Liquid Volume Lid
798-05-02A	Aluminum Equalising Block
798-05-02B	Copper Equalising Block
798-05-03	Twin Cell Holder for B12/40/210 Water Triple Point Cell
798-05-04	Thermometer Support Kit
796-05-01	Dual Large Water Triple Point Cell Holder
796-03	Monocular and Support
796-02-10	Overflow Adaptor
796-05-03	Thermometer Stand Kit
796-05-04	Large Gallium Cell Holder
796-05-05	Slim Gallium Cell Holder
798-02-58	Blackbody Assembly

915/07	Medium Silicon Oil 40°C to 180°C (per Litre)
915/08	High Silicon Oil 150°C to 250°C (per Litre)
915/09	Very High Silicon Oil 40°C to 288°C (per Litre)
936-06-07	C10 Silicon Oil -35°C to 140°C (per Litre)
580-06-09	C20 Silicon Oil Ambient to 200°C (per Litre)

	8.5 Litres Oil Required per Liquid Bath





Stirred Liquid Baths - Hydra
With Eurotherm Controller 0.01°C to 0.1°C resolution, Lid Assembly, Serial Communications and Cal Note Pad Software.


798H	Temperature Range 30°C to 300°C

798M	Temperature Range -40°C to 125°C

798L	Temperature Range -80°C to 125°C

Voltage Supply	110V – 50/60Hz
	230V – 50/60Hz

Accessories
796-05-02	Spare Liquid Volume Lid
798-05-02A	Aluminum Equalising Block
798-05-02B	Copper Equalising Block
798-05-02C	Special Aluminium Equalising Block (consult Isotech)
798-05-02D	Special Copper Equalising Block (consult Isotech)
798-05-03	Twin Cell Holder for B12/40/210 Water Triple Point Cell
798-05-04	Thermometer Support Kit
796-05-01	Dual Large Water Triple Point Cell Holder
796-05-03	Thermometer Stand Kit
798-02-58	Blackbody Assembly

915/07	Medium Silicon Oil 40°C to 180°C (per Litre)
915/08	High Silicon Oil 150°C to 250°C (per Litre)
915/09	Very High Silicon Oil 40°C to 288°C (per Litre)
936-06-07	C10 Silicon Oil -35°C to 140°C (per Litre)
580-06-09	C20 Silicon Oil Ambient to 200°C (per Litre)

	5 Litres Oil Required per Liquid Bath





Stirred Ice/Water Bath 813
350mm Immersion Depth, 8 Litre Capacity


813	Stirred Ice/Water Bath
	Temperature Range 0°C

Accessories
814/01b	Copper Equalising Block
814/02	Mercury Thermometer Support Kit
814-06-02	Small Water Triple Point Cell Kit (nett)
814-06-04	Large Water Triple Point Cell Kit (nett)


Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz





Large Volume Calibration Bath
Includes Serial Communications and Cal Notepad


820	Large Volume Calibration Bath
	Temperature Range 30°C to 200°C

Accessories
820/01	Standard Resistor Holder
820/02	Aluminium Equalising Block
820/02 S	Specially Drilled Equalising Block
820/03	Liquid in Glass Support Kit

915/07	Medium Silicon Oil 40°C to 180°C (per Litre)
915/08	High Silicon Oil 150°C to 250°C (per Litre)
915/09	Very High Silicon Oil 40°C to 288°C (per Litre)
932-19-72	SR for Standard Resistors (per Litre)

Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz





Liquid Selection Guide
For Hydra, Orion, 785 and 915


915/07	Medium Silicon Oil 40°C to 180°C (per Litre)
915/08	High Silicon Oil 150°C to 250°C (per Litre)
915/09	Very High Silicon Oil 40°C to 288°C (per Litre)
936-06-07	C10 Silicon Oil -35°C to 140°C (per Litre)
580-06-09	C20 Silicon Oil 20°C to 200°C (per Litre)



Fume Extraction	Provision for adequate fume extraction needs to be made when using any open liquid bath

	Requirement varies depending on the liquid used and the temperature range





Fluidized Calibration Bath
Supplied with 25kgs Alumina Powder, Calibration Tube 875/02, 875/15 Equalising Block, Serial Communications and Cal Notepad Software


875	Fluidized Calibration Bath
	Temperature Range 50°C to 700°C

Voltage Supply	208/240V – 50/60Hz

Accessories
875/03	Compressor and Connecting Tube (nett)
875/04	25kg Container Alumina Powder
875/06	Liquid in Glass Thermometer Support Gantry includes 875/07
875/07	Additional Multi-Tube Probe Holder
875/08	Monocular and Support
875/15	Additional Equalising Block (8x8mm pockets x 240mm deep)





Thermocouple Calibration Furnace - Saturn
With Standard Equalising Block, Spare Set Windings, Serial Communications and Cal Notepad Software


877	Thermocouple Calibration Furnace - Saturn
	Temperature Range 100°C to 1300°C

Voltage Supply	208/240V – 50/60Hz
	115V – 50/60Hz

Accessories
877/01	Replacement Standard Equalising Block - 4 x 8mm x 4 x 6mm i.d. - 180mm leg length
877/01S	Special Equalising Block - 16 x 6mm i.d. - 180mm leg length
877/01E	Special Equalising Block - other configurations - (consult Isotech)
877/02	Platinum Foil Temperature Barrier (nett)
935-14-130	Replacement Control Thermocouple Type R





ITS-90 Isothermal Towers
Integrated ITS-90 Fixed Point Calibration System with Certificate of Purity and a Melt and Freeze Curve. Serial Communications and Cal Notepad Software included


490	Indium 156.5985°C
491	Tin 231.928°C
492	Zinc 419.527°C
493	Aluminium 660.323°C


Special Package Price
Tin, Zinc and Aluminium systems when ordered together


Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz


Calibration Option	UKAS Fixed Point Cell Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





Slim Fixed Point Cells Sealed
99.9999% Pure. With Certificate of Conformity

Quartz Clad Slim Fixed Point Cells
Require to be hand carried
17668 QS	Indium 156.5985°C
17669 QS	Tin 231.928°C
17671 QS	Zinc 419.527°C
17672 QS	Aluminum 660.323°C
17673 QS	Silver 961.78°C
17674 QS	Copper 1084.62°C

Metal Clad Slim Fixed Point Cells
Transportable
17401 M	Gallium 29.7646°C
17724 M	Mercury -38.8344°C
17668 ML	Indium 156.5985°C
17669 ML	Tin 231.928°C
17671 ML	Zinc 419.527°C
17672 ML	Aluminum 660.323°C

Accessories
510-05-00	Inconel basket including insulators for use with Medusa - Indium to Zinc (nett)
511-05-01	Inconel basket including insulators for use with Medusa 511 - Aluminium (nett)
426-04-00	Inconel basket including insulators for use with Oberon - Aluminium to Copper (nett)

Calibration Option	Traceable and UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties

Hazardous (consult Isotech)	Due to the hazardous nature of Gallium and Mercury these cells are packed and shipped in accordance to IATA specification





Water Triple Point Cells
With Certificate of Conformity


B8/30/130	Temperature, 0.01°C
B12/40/210	Temperature, 0.01°C
B12/46/210	Temperature, 0.01°C


Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





POTTS - Europa-6
Includes Site Indicator, Semi-Standard 935-14-82/DB, Serial Communications, Cal Note Pad Software and Traceable Certificate.


520	Europa-6 POTTS
	Temperature Range 65°C below ambient to 140°C

Metal Block Bath
951-02-15	Standard Insert - 2x4.5mm, 2x6.4mm, 1x8mm, 1x9.5mm x 157mm deep
951-02-15a	Blank Insert
951-02-15c	Non Standard Insert (consult Isotech)
951-06-07	Insert Type B - 1x13mm, 1x10mm, 1x8mm, 1x5mm and 1.3.5mm x 157mm deep
951-06-08	Insert Type C - 1x8mm, 6x6.5mm x 157mm deep
935-14-82/DB	Additional Semi Standard PRT
UKAS	5 Point Comparison Calibration (nett)
Stirred Liquid Bath/Stirred Ice/Water Bath
951-06-01	Stirred Liquid Container for alcohol’s, water and oils
951-06-03	Liquid in Glass Thermometer Support Kit
Blackbody Source
951-06-04	Blackbody Target
Surface Sensor Calibrator
951-06-02	Surface Sensor Calibrator Kit
ITS-90 Fixed Point Apparatus
17724 M	Slim Mercury Triple Point Cell and Insulation Assembly
17401 M	Slim Gallium Melt Point Cell
B8/30/130	Water Triple Point Cell, Container and 3 caps
Accessories
520-05-01	C10 Oil (-35°C to 140°C) 0.1 Litre required
932-12-55	Replacement Liquid Container Magnetic Follower (Qty 5)
935-14-83	Replacement Surface Sensor Probe
951-02-19	Replacement Surface Sensor Insert
951-02-29	Slim WTP Cell Container (nett)
951-02-30	Slim WTP Cell Container Caps (Qty 3) (nett)
520-03-00	Slim Mercury Cell Insulation Assembly (nett)
931-22-111	Carrying Case with wheels and pull out handle (nett)

Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz

Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





POTTS - Oceanus-6
Includes Site Indicator, Semi-Standard 935-14-85/DB, Serial Communications, Cal Note Pad Software, Timer and Traceable Certificate.


580	Oceanus-6 POTTS
	Temperature Range 45°C below ambient to 140°C

Metal Block Bath
580-06-03	Standard Insert - 6x8mm x 250mm deep
580-06-04	Blank Insert
580-06-05	Non Standard Insert (consult Isotech)
580-06-06	Adjustable Equalising Block - 6x8mm x 157mm deep
935-14-85/DB	Additional Semi Standard PRT
UKAS	5 Point Comparison Calibration (nett)
Stirred Liquid Bath/Stirred Ice/Water Bath
580-06-07	Stirred Liquid Container for alcohol’s, water and oils
580-06-00	Liquid in Glass Thermometer Support Kit
Blackbody Source
580-02-12	Blackbody Target
Surface Sensor Calibrator
580-06-08	Surface Sensor Calibrator Kit (consists of probe and insert)
ITS-90 Fixed Point Apparatus
17401	Gallium Melt Point Cell & Support
B12/46/210	Water Triple Point Cell & Supports
Accessories
936-06-07	C10 Oil (-35°C to 150°C) 1 Litre required
932-12-74	Replacement Liquid Container Magnetic Follower (Qty 5)
935-14-114	Replacement Surface Sensor Probe
580-02-11	Replacement Surface Sensor Insert
580-06-01	WTP Cell Support (nett)
580-06-02	Gallium Cell Support (nett)
931-22-58	Storage Case (nett)

Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz

Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





POTTS - Medusa 510
Includes Site Indicator, Semi-Standard 935-14-95H/DB, Serial Communications, Cal Note Pad Software, Timer and Traceable Certificate.


510	Medusa 510 POTTS
	Temperature Range 30°C to 550°C

Metal Block Bath
510-06-01	Standard Insert - 6x8mm x 250mm deep
510-06-02	Blank Insert
510-06-03	Non Standard Insert (consult Isotech)
510-06-04	Adjustable Equalising Block - 6x8mm x 157mm deep
935-14-95H/DB	Additional Semi Standard PRT
UKAS	5 Point Comparison Calibration (nett)
Blackbody Source
510-06-05	Blackbody Target
Surface Sensor Calibrator
510-06-06	Surface Sensor Calibrator Kit (consists of probe and insert)
ITS-90 Fixed Point Apparatus - Metal Clad Slim Fixed Point Cells
Transportable
17668 ML	Slim Metal Clad Indium Fixed Point Cell
17669 ML	Slim Metal Clad Tin Fixed Point Cell
17671 ML	Slim Metal Clad Zinc Fixed Point Cell
ITS-90 Fixed Point Apparatus - Quartz Clad Slim Fixed Point Cells
Require to be hand carried
17668 QS	Slim Quartz Clad Indium Fixed Point Cell
17669 QS	Slim Quartz Clad Tin Fixed Point Cell
17671 QS	Slim Quartz Clad Zinc Fixed Point Cell
Accessories
935-14-66	Replacement Standard Thermocouple for BB Target
935-14-118	Replacement Surface Sensor Probe
510-02-02	Replacement Surface Sensor Calibrator Insert
510-05-00	Slim Cell Holder including Insulators - Indium to Zinc (nett)
931-22-58	Storage Case (nett)

Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz

Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





POTTS - Medusa 511
Includes Site Indicator, Semi-Standard 935-14-95H/DB, Serial Communications, Cal Note Pad Software, Timer and Traceable Certificate.

511	Medusa 511 POTTS
	Temperature Range 50°C to 700°C

Metal Block Bath
511-06-01	Standard Insert - 6x8mm x 250mm deep
511-06-02	Blank Insert
511-06-03	Non Standard Insert (consult Isotech)
511-06-04	Adjustable Equalising Block - 6x8mm x 157mm deep
935-14-95H/DB	Additional Semi Standard PRT
UKAS	5 Point Comparison Calibration (nett)
Blackbody Source
511-06-05	Blackbody Target
Surface Sensor Calibrator
511-06-06	Surface Sensor Calibrator Kit (consists of probe and insert)
ITS-90 Fixed Point Apparatus - Metal Clad Slim Fixed Point Cells
Transportable
17668 ML	Slim Metal Clad Indium Fixed Point Cell
17669 ML	Slim Metal Clad Tin Fixed Point Cell
17671 ML	Slim Metal Clad Zinc Fixed Point Cell
17672 ML	Slim Metal Clad Aluminium Fixed Point Cell
ITS-90 Fixed Point Apparatus - Quartz Clad Slim Fixed Point Cells
Require to be hand carried
17668 QS	Slim Quartz Clad Indium Fixed Point Cell
17669 QS	Slim Quartz Clad Tin Fixed Point Cell
17671 QS	Slim Quartz Clad Zinc Fixed Point Cell
17672 QS	Slim Quartz Clad Aluminium Fixed Point Cell
Accessories
935-14-66	Replacement Standard Thermocouple for BB Target
935-14-118	Replacement Surface Sensor Probe
510-02-02C	Replacement Surface Sensor Calibrator Insert
510-05-00	Slim Cell Holder including Insulators - Indium to Zinc (nett)
511-05-01	Slim Cell Holder including Insulators - Alunimium (nett)
931-22-58	Storage Case (nett)

Voltage Supply	108/130V – 50/60Hz
	208/240V – 50/60Hz

Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





POTTS - Oberon
Includes Serial Communications and Cal NotePad Software


426	Oberon POTTS
	Temperature Range 450°C to 1100°C

Voltage Supply	110V – 50/60Hz only

Metal Block Bath
426-06-05	Adjustable Equalising Block - 6x8mm x 160mm deep

ITS-90 Fixed Point Apparatus - Quartz Clad Slim Fixed Point Cells
Require to be hand carried
17672 QS	Slim Quartz Clad Aluminium Fixed Point Cell
17673 QS	Slim Quartz Clad Silver Fixed Point Cell
17674 QS	Slim Quartz Clad Copper Fixed Point Cell

Accessories
426-04-00	Inconel Cell Basket including Insulators - Aluminium to Copper - for use with Oberon (nett)
935-19-63	Isolation Transformer to allow operation from 240V supply (nett)
935-19-71	Isolation Transformer to allow operation from 220V supply (nett)

Calibration Option	UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties





Calibration Software



Cal Notepad	Permits connection of both an indicator and the calibration bath, view data on configurable chart displays, log data to file and control the bath

I Cal Easy	Can automatically calibrate up to 20 temperature sensors, calculate coefficients and print own design certificates

I Cal Easy Plus	Can automatically calibrate up to 20 temperature sensors, calculate coefficients and print own design certificates. Includes additional drivers for third party instruments. Before ordering consult Isotech.

Icarus	Designed to calculate SPRT coefficients, print and design own certificates

DATASHEET MANUAL PDF DOWNLOAD

제품 상담, 견적, AS 문의는 공식 인증 대리점 GENIUS INDUSTRIES에 문의하세요!

대한민국 No.1 산업장비 공급채널 지니어스인더스트리
070-8888-7179 / jiny@geniuss.kr

옵텍스 FA OPTEX FA BGS-ZL & BGS-Z SERIES 영문 데이터시트 & 매뉴얼 웨이게이트 WAYGATE MViQ 2.2mm 2-WAY VIDEOPROBE 한글 카탈로그 &영문 데이터시트