- 모든 브랜드
- 지니어스 이야기
- AEC
- ADDITEL
- ADVANCED ENERGY
- AMETEK
- BEAMEX
- BENTLY NEVADA
- CHROMA
- CS INSTRUMENTS
- DAHO
- DEWESOFT
- DITECT
- DRUCK
- EMERSON
- E+E
- EYC-TECH
- FLIR
- FLUKE
- FLUKE-NET
- FUTEK
- GRAPHTEC
- GW INSTEK
- HANYOUNG NUX
- HGH
- HIKMICRO
- HIOKI
- HI-TECHNIQUES
- ISOTECH
- KELLER
- KEYSIGHT
- KIKUSUI
- KIMO
- LECROY
- LEYRO
- KYORITSU
- MADGETECH
- MEGGER
- PROCEQ
- OPTEX FA
- ODA TECHNOLOGIES
- OWON
- PANAMETRICS
- PRODIGIT
- RHEONICS
- RIGOL
- RKC
- ROHDE&SCHWARZ
- ROTRONIC
- SAFEGAS
- SENSYS
- SHISHIDO
- SIKA
- SONOTEC
- SoundWater
- SP DEVICES
- SPERRY POWER
- S+S
- SUPMEA
- TEKHNE
- TEKTRONIX
- TERMEX
- TESTO
- TOYOTECH
- WAYGATE
- YOKOGAWA
- WIKA
- ETC
- KONICA MINOLTA
- SCHMIDT
아래 검색창을 통해 궁금하신 제품의 모델명을 검색해보세요.
최신 기준으로 전 우주에서 수집한 제품 관련 자료를 전부 보여드립니다.
ISOTECH판매중인 ISOTECH 제품 리스트
Isocal-6 Range - Hyperion 4936 | |
Includes magnetic stirrer, probe basket, lid and 3 point traceable certificate | |
4936 | Hyperion 4000 Series |
Temperature Range -25°C to 140°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
Stirred Liquid Bath/Stirred Ice/Water Bath | |
936-06-02 | Stirred Liquid Container Kit |
936-06-08 | Support Kit Assembly for up to 8 thermometers |
Metal Block Bath | |
936-06-01a | Standard Insert - 8 x 8mm x 2 x 4.5mm x 157mm deep |
936-06-01b | Blank Insert |
936-06-01c | Non Standard Insert (consult Isotech) |
935-14-61/DB | Semi-Standard PRT - Temperature Range -50°C to 250°C |
935-14-75/DB | 90° Angled Semi-Standard PRT - Temperature Range -50°C to 250°C |
Blackbody Source | |
936-06-03 | Blackbody Target |
Surface Sensor Calibrator | |
936-06-04 | Surface Sensor Calibrator Kit |
ITS-90 Fixed Point Apparatus | |
17401 M | Slim Gallium Melt Point Cell |
B8/30/130 | Water Triple Point Cell |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
936-06-07 | 1 Litre C10 Silicon Oil (-35°C to 140°C) (½L Required) |
932-12-74 | Replacement Liquid Container Magnetic Follower (Qty 5) |
935-14-114 | Replacement Surface Sensor Probe |
936-02-07 | Replacement Surface Sensor Insert |
936-06-09 | Slim WTP Cell & Gallium Cell Holder Assembly |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-112 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 108/130V – 50/60Hz |
208/240V – 50/60Hz | |
Isocal-6 Range - Drago 4934 | |
Includes magnetic stirrer, probe basket, lid and 3 point traceable certificate | |
4934 | Drago 4000 Series |
Temperature Range 30°C to 250°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
Stirred Liquid Bath/Stirred Ice/Water Bath | |
936-06-02 | Stirred Liquid Container Kit |
936-06-08 | Support Kit Assembly for up to 8 thermometers |
Metal Block Bath | |
936-06-01a | Standard Insert - 8 x 8mm x 2 x 4.5mm x 157mm deep |
936-06-01b | Blank Insert |
936-06-01c | Non Standard Insert (consult Isotech) |
935-14-61/DB | Semi Standard PRT - Temperature Range -50°C to 250°C |
935-14-75/DB | 90° Angled Semi Standard PRT - Temperature Range -50°C to 250°C |
Blackbody Source | |
936-06-03 | Blackbody Target |
Surface Sensor Calibrator | |
936-06-04 | Surface Sensor Calibrator Kit |
ITS-90 Fixed Point Apparatus | |
17401 M | Slim Gallium Melt Point Cell |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
580-06-09 | 1 Litre C20 Silicon Oil (20°C to 200°C) (½L Required) |
915/09 | 1 Litre VHT Silicon Oil (150°C to 250°C) (½L Required) |
935-14-114 | Replacement Surface Sensor Probe |
936-02-07 | Replacement Surface Sensor Insert |
936-06-09 | Slim Gallium Cell Holder Assembly |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-112 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 108/130V – 50/60Hz |
208/240V – 50/60Hz | |
Isocal-6 Range - Europa 4520 | |
Includes standard insert and 3 point traceable certificate | |
4520 | Europa 4000 Series |
Temperature Range -45°C to 140°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
Metal Block Bath | |
951-02-15 | Additional Standard Insert -2x4.5mm, 2x6.4mm, 1x8mm, 1x9.5mm x 157mm deep |
951-02-15a | Blank Insert |
951-02-15c | Non Standard Insert (consult Isotech) |
951-06-07 | Alternative insert type B - 1x13mm,1x10mm, 1x8mm,1x5mm, 1x3.5mm x 157mm deep |
951-06-08 | Alternative insert type C - 1x8mm, 6x6.5mm x 157mm deep |
935-14-82/DB | Semi Standard PRT - Temperature Range -50°C to 250°C |
935-14-75/DB | 90° Angled Semi Standard PRT - Temperature Range -50°C to 250°C |
Stirred Liquid Bath/Stirred Ice/Water Bath | |
951-06-01 | Stirred Liquid Container Kit |
921-02-06 | Liquid in Glass Thermometer Support Kit |
Blackbody Source | |
951-06-04 | Blackbody Target |
Surface Sensor Calibrator | |
951-06-02 | Surface Sensor Calibrator Kit |
ITS-90 Fixed Point Apparatus | |
17401 M | Slim Gallium Melt Point Cell |
17724 M | Slim Mercury Melt Point Cell and Insulation Assembly |
B8/30/130 | Water Triple Point Cell, Container and 3 Caps |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
520-05-01 | C10 Silicon Oil (-35°C to 140°C) 0.1L required |
932-12-55 | Replacement Liquid Container Magnetic Follower (Qty 5) |
935-14-83 | Replacement Surface Sensor Probe |
951-02-19 | Replacement Surface Sensor Insert |
951-02-29 | Slim WTP Cell Container (nett) |
951-02-30 | Slim WTP Cell Container Caps (nett) |
520-03-00 | Slim Mercury Cell Insulation Assembly (nett) |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-111 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 108/130V – 50/60Hz |
208/240V – 50/60Hz | |
Isocal-6 Range - Venus 4951 | |
Includes standard insert and 3 point traceable certificate | |
4951 | Venus 4000 Series |
Temperature Range -35°C to 140°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
Metal Block Bath | |
951-02-15 | Additional Standard Insert -2x4.5mm, 2x6.4mm, 1x8mm, 1x9.5mm x 157mm deep |
951-02-15a | Blank Insert |
951-02-15c | Non Standard Insert (consult Isotech) |
951-06-07 | Alternative insert type B - 1x13mm,1x10mm, 1x8mm,1x5mm, 1x3.5mm x 157mm deep |
951-06-08 | Alternative insert type C - 1x8mm, 6x6.5mmx157mm deep |
935-14-82/DB | Semi Standard PRT - Temperature Range -50°C to 250°C |
935-14-75/DB | 90° Angled Semi Standard PRT - Temperature Range -50°C to 250°C |
Stirred Liquid Bath/Stirred Ice/Water Bath | |
951-06-01 | Stirred Liquid Container Kit |
921-02-06 | Liquid in Glass Thermometer Support Kit |
Blackbody Source | |
951-06-04 | Blackbody Target |
Surface Sensor Calibrator | |
951-06-02 | Surface Sensor Calibrator Kit |
ITS-90 Fixed Point Apparatus | |
17401 M | Slim Gallium Melt Point Cell |
B8/30/130 | Water Triple Point Cell, Container and 3 Caps |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
520-05-01 | C10 Silicon Oil (-35°C to 140°C) 0.1L required |
932-12-55 | Replacement Liquid Container Magnetic Follower (Qty 5) |
935-14-83 | Replacement Surface Sensor Probe |
951-02-19 | Replacement Surface Sensor Insert |
951-02-29 | Slim WTP Cell Container (nett) |
951-02-30 | Slim WTP Cell Container Caps (nett) |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-111 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 108/130V – 50/60Hz |
208/240V – 50/60Hz | |
Isocal-6 Range - Calisto 4953 | |
Includes standard insert and 3 point traceable certificate | |
4953 | Calisto 4000 Series |
Temperature Range 30°C to 250°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
Metal Block Bath | |
951-02-15 | Additional Standard Insert -2x4.5mm, 2x6.4mm, 1x8mm, 1x9.5mm x 157mm deep |
951-02-15a | Blank Insert |
951-02-15c | Non Standard Insert (consult Isotech) |
951-06-07 | Alternative insert type B - 1x13mm,1x10mm, 1x8mm,1x5mm, 1x3.5mm x 157mm deep |
951-06-08 | Alternative insert type C - 1x8mm, 6x6.5mm x 157mm deep |
935-14-82/DB | Semi Standard PRT - Temperature Range -50°C to 250°C |
935-14-75/DB | 90° Angled Semi Standard PRT - Temperature Range -50°C to 250°C |
Stirred Liquid Bath/Stirred Ice/Water Bath | |
951-06-01 | Stirred Liquid Container Kit |
921-02-06 | Liquid in Glass Thermometer Support Kit |
Blackbody Source | |
951-06-04 | Blackbody Target |
Surface Sensor Calibrator | |
951-06-02 | Surface Sensor Calibrator Kit |
ITS-90 Fixed Point Apparatus | |
17401 M | Slim Gallium Melt Point Cell |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
951-06-06 | C20 Silicon Oil (20°C to 200°C) 0.1L required |
953-04-01 | VHT Silicon Oil (150°C to 250°C) 0.1L required |
932-12-55 | Replacement Liquid Container Magnetic Follower (Qty 5) |
935-14-83 | Replacement Surface Sensor Probe |
951-02-19 | Replacement Surface Sensor Insert |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-111 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 108/130V – 50/60Hz |
208/240V – 50/60Hz | |
Dry Block Calibrator - Jupiter 4852 | |
Includes standard insert and 3 point traceable certificate | |
4852 | Jupiter 4000 Series |
Temperature Range 35°C to 660°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
Metal Block Bath | |
852-07-11 | Additional Standard Insert -2x4.5mm, 2x6.4mm, 1x8mm, 1x9.5mm x 140mm deep |
852-07-07 | Blank Insert |
852-07-07c | Non Standard Insert (consult Isotech) |
852-09-03 | Alternative insert type B - 1x13mm,1x10mm, 1x8mm,1x5mm, 1x3.5mm x 140mm deep |
852-09-04 | Alternative insert type C - 1x8mm, 6x6.5mm x 140mm deep |
935-14-72/DB | Semi Standard PRT - Temperature Range -50°C to 670°C |
935-14-79/DB | 90° Angled Semi Standard PRT - Temperature Range -50°C to 660°C |
Blackbody Source | |
852-09-05 | Blackbody Target Kit |
Surface Sensor Calibrator | |
852-07-15 | Surface Sensor Calibrator Kit |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
853-04-02 | Rapid Air Cooling |
935-14-118 | Replacement Surface Sensor/Black Body Probe |
852-07-14 | Replacement Surface Sensor Insert |
852-09-02 | Spare Insulation Pack for Black Body Source (nett) |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-111 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 100/120V – 50/60Hz (nett) additional cost |
200/240V – 50/60Hz | |
Dry Block Calibrator - Gemini 4857/550 | |
Includes 3 point traceable certificate | |
4857/550 | Gemini 550/4000 Series |
Temperature Range 35°C to 550°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
935-14-72/DB | Semi Standard PRT - Temperature Range -50°C to 670°C |
935-14-79/DB | 90° Angled Semi Standard PRT - Temperature Range -50°C to 660°C |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
Mixed | Set of 4 Aluminium Sleeves - optional single hole per sleeve. Specify from 4, 6, 8, 10, 12 or 14 x 150mm deep |
857-07-01 | Set of 4 Aluminium Sleeves - blank |
857-07-03 | One Aluminium Sleeve with 2 x 4.5mm x 150mm deep |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-111 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 100/120V – 50/60Hz |
200/240V – 50/60Hz | |
Dry Block Calibrator - Gemini 4857/700 | |
Includes 3 point traceable certificate | |
4857/700 | Gemini 700/4000 Series |
Temperature Range 50°C to 700°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
935-14-72/DB | Semi Standard PRT - Temperature Range -50°C to 670°C (for use up to 650°C) |
935-14-79/DB | 90° Angled Semi Standard PRT - Temperature Range -50°C to 660°C |
935-14-63 | Type N Thermocouple - Temperature Range 0°C to 1200°C (for use up to 700°C) |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
Mixed | Set of 4 Bronze Sleeves - optional single hole per sleeve. Specify from 4, 6, 8, 10, 12 or 14 x 150mm deep |
857-07-02 | Set of 4 Bronze Sleeves - blank |
857-07-04 | One Bronze Sleeve with 2x4.5mm x 150mm deep |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-111 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 100/120V – 50/60Hz |
200/240V – 50/60Hz | |
Dry Block Calibrator - Gemini 4857/550/LRI | |
Includes large removeable insert with 8 x 8mm pockets x 154mm deep and 3 point traceable certificate | |
4857/550/LRI | Gemini 550 LRI 4000 Series |
Temperature Range 35°C to 550°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
935-14-72/DB | Semi Standard PRT - Temperature Range -50°C to 670°C |
935-14-79/DB | 90° Angled Semi Standard PRT - Temperature Range -50°C to 660°C |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
976-07-01a | Additional Standard Removable Insert |
976-07-01b | Blank Insert |
976-07-01c | Non Standard Insert (consult Isotech) |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-112 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 100/120V – 50/60Hz |
200/240V – 50/60Hz | |
Dry Block Calibrator - Gemini 4857/700/LRI | |
Includes large removeable insert with 8 x 8mm pockets x 154mm deep and 3 point traceable certificate | |
4857/700/LRI | Gemini 700 LRI 4000 Series |
Temperature Range 50°C to 700°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
935-14-72/DB | Semi Standard PRT - Temperature Range -50°C to 670°C (for use up to 650°C) |
935-14-79/DB | 90° Angled Semi Standard PRT - Temperature Range -50°C to 660°C |
935-14-63 | Type N Thermocouple - Temperature Range 0°C to 1200°C (for use up to 700°C) |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
976-07-02a | Additional Standard Removable Insert |
976-07-02b | Blank Insert |
976-07-02c | Non Standard Insert (consult Isotech) |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-112 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 100/120V – 50/60Hz |
200/240V – 50/60Hz | |
Portable Calibration Furnace - Pegasus 4853 | |
Includes standard insert and 3 point traceable certificate | |
4853 | Pegasus 4000 Series |
Temperature Range 150°C to 1200°C | |
ADVANCED | with Ethernet Interface and I-Cal Easy LOG Software |
SITE | with Serial Communications and Cal Notepad Software |
BASIC | with Serial Communications and Cal Notepad Software |
Metal Block Bath | |
853-06-01 | Additional Standard Insert - 4x8mm Pockets |
853-06-02 | Blank Insert |
853-06-02b | Non Standard Insert (consult Isotech) |
935-14-91 | Semi Standard Type R Thermocouple - Temperature Range 0°C to 1300°C |
Blackbody Source | |
853-06-03 | Blackbody Target Kit (nett) |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (when ordered) (nett) |
UKAS-SYST ADVANCED ONLY | 5 point calibration for block temperature and reference probe (when ordered) and electrical simulation of indicator (nett) |
UKAS-SIM ADVANCED ONLY | Calibration of input channels, electrical simulation only (nett) |
Accessories | |
853-04-02 | Rapid Air Cooling |
935-14-115 | Replacement Black Body Probe |
970-05-01 | Spare Insulation Pack for Black Body Source (nett) |
853-06-04 | Spare Insulation Pack for Metal Block Bath Insert (nett) |
935-06-161 | Current Loop Adaptor (ADVANCED and Site only) |
931-22-111 | Carrying Case with wheels and pull out handle (nett) |
Voltage supply | 100/120V – 50/60Hz |
200/240V – 50/60Hz | |
Portable Calibration Furnace - Pegasus T Model 853T | |
Includes Semi-Standard Type R Thermocouple 935-14-91 type R thermocouple and 3 point traceable certificate | |
853T | Pegasus T |
Temperature Range 150°C to 1200°C | |
Voltage supply | 100/120V – 50/60Hz |
200/240V – 50/60Hz | |
Accessories | |
853-02-31 | Standard Insert - 6 x 5mm pockets |
853-02-30 | Blank Insert |
843-02-30B | Non Standard Insert (consult Isotech) |
935-14-91 | Replacement Semi Standard Type R Thermocouple - Temperature Range 0°C to 1300°C |
UKAS Calibration Option | |
UKAS-TEMP | 5 point calibration for block temperature and reference probe (nett) |
Temperature Test Unit - Quick Cal Low Temperature | |
Includes 1 standard sleeve, 1 blank sleeve and 3 point traceable certificate | |
560 | Low Temperature Quick Cal |
Temperature Range -12°C to 140°C | |
Accessories | |
560-06-01A | Additional Standard Sleeve with 1x6.8mm pocket x 120mm deep |
560-06-01B | Blank Sleeve |
560-06-01C | Non Standard Sleeve (consult Isotech) |
935-14-98 | Semi-Standard PRT - Temperature Range -50°C to 350°C |
935-42-14 | Rechargeable Battery (nett) |
935-42-19 | Battery Charger (220/240V - 50/60HZ) (nett) |
935-42-22 | Battery Charger (110/120V - 50/60HZ) (nett) |
931-22-100 | Carrying Case (nett) |
UKAS | 5 Point Comparison Calibration (nett) |
Voltage supply | Switch Mode Voltage Supply 100 to 240V - 50/60HZ |
Farenheit Operation Available | |
Temperature Test Unit - Quick Cal High Temperature | |
Includes standard insert and 3 point traceable certificate | |
550 | High Temperature Quick Cal |
Temperature Range 30°C to 350°C | |
Accessories | |
550-06-01A | Additional Standard Insert with 1x8mm, 2x4.5mm and 2x6.5mm x 115mm deep |
550-06-01B | Blank Insert |
550-06-01C | Non Standard Insert (consult Isotech) |
935-14-98 | Semi-Standard PRT - Temperature Range -50°C to 350°C |
931-22-100 | Carrying Case (nett) |
UKAS | 5 Point Comparison Calibration (nett) |
Voltage supply | 100/130V – 50/60Hz |
200/240V – 50/60Hz | |
Industrial Temperature Calibrators - Fast Cal | |
Include 3 point traceable certificate, Serial Communications, Cal Notepad Software and Carrying Case | |
907 | Fast-Cal HTM 2010 with Fixed Block of 3 x 4.5mm, 1 x 6.5mm and 1x8mm x 145mm deep |
Temperature Range -35°C to 140°C | |
BASIC Version | |
COMPLETE with Semi Standard 935-14-82/DB | |
907 | Fast-Cal Low with standard insert 2x4.5mm, 1x6.5mm and 1x8mm x 140mm deep |
Temperature Range -35°C to 140°C | |
BASIC Version | |
COMPLETE with Semi Standard 935-14-82/DB | |
907 | Fast-Cal Medium with standard insert 2x4.5mm, 1x6.5mm and 1x8mm x 140mm deep |
Temperature Range 30°C to 350°C | |
BASIC Version | |
COMPLETE with Semi Standard 935-14-98/DB | |
907 | Fast-Cal High with standard insert 2x4.5mm, 1x6.5mm and 1x8mm x 140mm deep |
Temperature Range 35°C to 650°C | |
BASIC Version | |
COMPLETE with Semi Standard 935-14-72/DB | |
COMPLETE with Semi Standard 935-14-63/DB | |
Acessories | |
907-02-03 | Additional Standard Insert (Low and Medium) |
907-02-03b | Blank Insert (Low and Medium) |
907-02-03c | Special Insert (Low and Medium) |
907-02-03d | Additional Standard Insert (High only) |
907-02-03f | Blank Insert (High only) |
907-02-03g | Special Insert (High only) |
UKAS | 5 Point Comparison Calibration (nett) |
Voltage supply | 100/130V – 50/60Hz |
200/240V – 50/60Hz | |
ITS-90 Isothermal Towers | |
Integrated ITS-90 Fixed Point Calibration System with Certificate of Purity and a Melt and Freeze Curve. Serial Communications and Cal Notepad Software. | |
490 | Indium 156.5985°C |
491 | Tin 231.928°C |
492 | Zinc 419.527°C |
493 | Aluminium 660.323°C |
Special Package Price | |
Tin, Zinc and Aluminium systems when ordered together | |
Voltage supply | 108/130V – 50/60Hz |
208/240V – 50/60Hz | |
Calibration Option | UKAS Fixed Point Cell Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties |
Slim Fixed Point Cells Sealed | |
99.9999% Pure. With Certificate of Conformity | |
Quartz Clad Slim Fixed Point Cells | |
Require to be hand carried | |
17668 QS | Indium 156.5985°C |
17669 QS | Tin 231.928°C |
17671 QS | Zinc 419.527°C |
17672 QS | Aluminum 660.323°C |
17673 QS | Silver 961.78°C |
17674 QS | Copper 1084.62°C |
Metal Clad Slim Fixed Point Cells | |
Transportable | |
17401 M | Gallium 29.7646°C |
17724 M | Mercury -38.8344°C |
17668 ML | Indium 156.5985°C |
17669 ML | Tin 231.928°C |
17671 ML | Zinc 419.527°C |
17672 ML | Aluminum 660.323°C |
Accessories | |
510-05-00 | Inconel basket including insulators for use with Medusa - Indium to Zinc (nett) |
511-05-01 | Inconel basket including insulators for use with Medusa 511 - Aluminium (nett) |
426-04-00 | Inconel basket including insulators for use with Oberon - Aluminium to Copper (nett) |
Calibration Option | Traceable and UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties |
Hazardous (consult Isotech) | Due to the hazardous nature of Gallium and Mercury these cells are packed and shipped in accordance to IATA specification |
Water Triple Point Cells | |
With Certificate of Conformity | |
B8/30/130 | Temperature, 0.01°C |
B12/40/210 | Temperature, 0.01°C |
B12/46/210 | Temperature, 0.01°C |
Calibration Option | UKAS Fixed Point Calibration available refer to Calibration Price List for more information on temperature ranges and uncertainties |
Isocal-6 Range - Oceanus-6 | |
Includes standard insert, 3 point traceable Certificate Serial Communications and Cal Notepad Software | |
580 | Oceanus-6Plus |
Temperature Range 45°C below ambient to 140°C | |
BASIC Version | |
SITE Version | |
Metal Block Bath | |
580-06-03 | Additional Standard Insert - 6x8mm x 250mm deep |
580-06-04 | Blank Insert |
580-06-05 | Non Standard Insert (consult Isotech) |
580-06-06 | Adjustable Equalising Block - 6x8mm x 157mm deep |
935-14-85/DB | Semi Standard PRT - Temperature Range -50°C to 250°C |
UKAS | 5 Point Comparison Calibration (nett) |
Stirred Liquid Bath/Stirred Ice/Water Bath | |
580-06-07 | Stirred Liquid Container for alcohol’s, water and oils |
580-06-00 | Liquid in Glass Thermometer Support Kit |
Blackbody Source | |
580-02-12 | Blackbody Target |
Surface Sensor Calibrator | |
580-06-08 | Surface Sensor Calibrator Kit |
ITS-90 Fixed Point Apparatus | |
17401 | Gallium Melt Point Cell & Support |
B12/46/210 | Water Triple Point Cell & Supports |
Accessories | |
936-06-07 | C10 Oil (-35°C to 140°C) 1 Litre required |
932-12-74 | Replacement Liquid Container Magnetic Follower (Qty 5) |
935-14-114 | Replacement Surface Sensor Probe |
580-02-11 | Replacement Surface Sensor Insert |
580-06-01 | WTP Cell Support (nett) |
580-06-02 | Gallium Cell Support (nett) |
931-22-58 | Storage Case (nett) |
Voltage supply | 100/130V – 50/60Hz |
200/240V – 50/60Hz | |
Dry Block Calibrator - Medusa 510 | |
Includes standard insert, 3 point traceable Certificate Serial Communications and Cal Notepad Software | |
510 | Medusa 510 |
Temperature Range 30°C to 550°C | |
BASIC Version | |
SITE Version | |
Metal Block Bath | |
510-06-01 | Additional Standard Insert - 6x8mm x 250mm deep |
510-06-02 | Blank Insert |
510-06-03 | Non Standard Insert (consult Isotech) |
510-06-04 | Adjustable Equalising Block - 6 x 8mm holes x 157mm deep |
935-14-95H/DB | Semi Standard PRT - Temperature Range -80°C to 670°C |
UKAS | 5 Point Comparison Calibration (nett) |
Blackbody Source | |
510-06-05 | Blackbody Target |
Surface Sensor Calibrator | |
510-06-06 | Surface Sensor Calibrator Kit |
ITS-90 Fixed Point Apparatus - Metal Clad Slim Fixed Point Cells | |
Transportable | |
17668 ML | Slim Metal Clad Indium Fixed Point Cell |
17669 ML | Slim Metal Clad Tin Fixed Point Cell |
17671 ML | Slim Metal Clad Zinc Fixed Point Cell |
ITS-90 Fixed Point Apparatus - Quartz Clad Slim Fixed Point Cells | |
Require to be hand carried | |
17668 QS | Slim Quartz Clad Indium Fixed Point Cell |
17669 QS | Slim Quartz Clad Tin Fixed Point Cell |
17671 QS | Slim Quartz Clad Zinc Fixed Point Cell |
Accessories | |
935-14-66 | Replacement Standard Thermocouple for BB Target |
935-14-118 | Replacement Surface Sensor Probe |
510-02-02 | Replacement Surface Sensor Calibrator Insert |
510-05-00 | Slim Cell Holder including Insulators - Indium to Zinc (nett) |
931-22-58 | Storage Case (nett) |
Voltage supply | 100/130V – 50/60Hz |
200/240V – 50/60Hz | |
Dry Block Calibrator - Medusa 3 511 | |
Includes standard insert, 3 point traceable Certificate Serial Communications and Cal Note Pad Software | |
511 | Medusa 3 511 |
Temperature Range 50°C to 700°C | |
BASIC Version | |
SITE Version | |
Metal Block Bath | |
511-06-01 | Additional Standard Insert - 6x8mm x 250mm deep |
511-06-02 | Blank Insert |
511-06-03 | Non Standard Insert (consult Isotech) |