| Model Name | Description |
| GL240 K | midi LOGGER |
| GL840-M K | midi LOGGER
Multi-inputs model |
| GL840-WV K | midi LOGGER
Withstand-voltage model |
| GLT400 | midi use data logger
*Need to set up with B-564/B-564-SL/B-565 and B-566 |
| GL980 K | midi LOGGER, 8-channels, High-speed, Data Logger |
| GL2000 K | midi LOGGER HV, 4-channels, High-speed, Data Logger |
| DP-581H E | Thermal Printer : Demo Unit |
| ACADP-20 K | AC Adapter, with power cable, for GL240,GL840,
GL980,GL2000 |
| B100990601 | Test report (Inspection) |
| B100990602 | Calibration Certificate |
| B100990603 | Traceability Chart |
| B-513-AS | Input cable, for Logic/Alarm, 2 m long |
| B-514-AS | Power cable, DC drive, 2 m long |
| B-540 | DIN rail mounting bracket, for extension terminal GL820/840 |
| B-551-10 | Shunt resistor 250 ohms |
| B-559 | Sync. Cable, 1m, Synchronizing GL7000 |
| B-560-05 | Extension cable for B-560 |
| B-560A | Input connector (screw terminal) for GL7-DCB Module |
| B-560AP | Terminal holding bracket
for B-560A |
| B-561 | Conversion cable, DSUB and NDIS for GL7-DCB |
| B-562 | Input cable, SMA-BNC Cable for GL7000 |
| B-564 | 20CH Input terminal (Withstand-voltage type)
For GL840 |
| B-564-SL | 20ch Screwless Input Terminal (Multi-input type) |
| B-565 | Input terminal
(Withstand voltage type)
For GL840 |
| B-566 | Extension terminal base unit, connection plate
For GL840 |
| B-567-05 | Connection cable (50 cm) for Extension terminal
For GL840 |
| B-567-20 | Connection cable (2 m) for Extension terminal
For GL840 |
| B-568 | Wireless LAN unit
For GL840/GL240
*It is available in limited region. (US, EU, Japan) |
| B-569 | Lithium-ion battery pack, 7.2V 21Wh |
| B-570 | Bracket for DIN rail
(GL840/ＧＬ900)
Built to order |
| B-571 | Connection Cable for GL820-B566
Built to order |
| B-577 | Cover, Rubber Protector for GL240
(for Replacement) |
| B-578 | Cover, Rubber Protector for GL840
(for Replacement) |
| B-579 | Cover, Rubber Protector for GL980&GL2000
(for Replacement) |
| B-581 | Storage case for GL series |
| B-585 | Carrying tool for GL7000 |
| B-586 | Storage case for GL series |
| B-588 | Terminal Base Cover |
| GL7000 K | DATA PLATFORM, Data Acquisition unit |
| GL7-CHA | Amplifier module, Charge-type sensor, 4 channels, for GL7000 |
| GL7-DCB OS | Amplifier module, Strain-gauge type sensor, 4 channels, for GL7000 |
| GL7-DCO | Amplifier module, Voltage Output, 8 channels, for GL7000 |
| GL7-DISP | Waveform monitor module for GL7000 |
| GL7-HSV | Amplifier module, High Speed Voltage, 4 channels, for GL7000 |
| GL7-HV | Amplifier module, High Voltage, 2 channels, for GL7000 |
| GL7-L/P | Amplifier module, Logic/Pulse, 16 channels, for GL7000 |
| GL7-M | Amplifier module, Voltage & Temperature, 10 channels, for GL7000 |
| GL7-SSD | Data storage module for GL7000 |
| GL7-V | Amplifier module, Voltage, 10 channels, for GL7000 |
| GL100-N | PetitLOGGER (standard) |
| GL100-WL | PetitLOGGER (WLAN) |
| GS-103AT-4P | Thermistor sensor (standard type) for GL100 |
| GS-103JT-4P | Thermistor sensor (Ultrathin type) for GL100 |
| GS-3AT | Acceleration/Temp. sensor for GL100 |
| GS-4TSR | Thermistor input adapter for GL100 |
| GS-4VT | Voltage/Temp. input adapter for GL100 |
| GS-AC100A | AC current sensor (100A) for GL100 |
| GS-AC200A | AC current sensor (200A) for GL100 |
| GS-AC50A | AC current sensor (50A) for GL100 |
| GS-CO2 | Carbon dioxide sensor for GL100 |
| GS-DPA | Dual port adapter for GL100 |
| GS-DPA-AC | AC current sensor adapter for GL100 |
| GS-EXC | Module extension cable for GL100 |
| GS-LXUV | Illuminance/UV sensor for GL100 |
| GS-TH | Temp./Humidity sensor for GL100 |
| RIC-10A | Input probe set (RIC-07 + RIC-08 + RIC-09) |
| RIC-141A | Input probe, BNC (plug) - Grabber clip, CAT II, 1.2 m |
| RIC-142 | Input cable, BNC (plug) - BNC (plug), CAT II 1.5m |
| RIC-143 | Input cable, BNC (plug) - Banna plug (plug), CAT II, 1.5m |
| RIC-144A | Clip, Alligator (small size), CAT II for RIC-143 cable |
| RIC-145 | Clip, Alligator (middle size), CAT II, for RIC-143 cable |
| RIC-146 | Clip, Grabber, CAT II for RIC-143 cable |
| RIC-147 | Input cable, High-voltage Banana-BNC
1.6m, 1000V CAT II |
| RIC-410 | Thermocouple, K type, Rod-shaped, 1.1 m |
| RIC-420 | Thermocouple, K type, for surface, 1.1 m |
| RIC-430 | Thermocouple, K type, L-shaped, for surface, 1.1 m |
| SMA-102 | Input adapter, BNC (plug) to Banana (receptacle) |
| B-530 | Humidity sensor, with 3 m cable |
| KT201-A | Hot stylus pen, for GS3310 pen motor, WR3320 |
| KT202-A | Hot stylus pen, for GW3310 pen motor, WR3320 |
| KT203 | Hot stylus pen, for Event marking, WR3320 |
| KT209 | Hot stylus pen, for Time marking, WR3320 |
| KX103-R | Fiber-tip pen, Water-based, Red, WX1100, WX1200 |
| KX104-B | Fiber-tip pen, Water-based, Black, WX1100, WX1200 |
| PR230-R5A | Chart paper,Roll, Black, 110 mm x 40 m, WR300 |
| PR231A-R10A | Chart paper, Roll, Black, 210 mm x 40 m, WR300 series 8&16-ch |
| PR410-2B-R5A | Chart paper, Roll, Black, 100 m, WR3320A-2H |
| PR412-4B-R5A | Chart paper, Roll, 40 mm x 4 ch, 100 m, WR3320-4 |
| PR413-6B-R5A | Chart paper, Roll, 40 mm x 6 ch, 100 m, WR3320-6 |
| PR420-1B-R5A | Chart paper, Roll, 80 mm x 1 ch, 100 m, WR3320-1D |
| PR422-2B-R5A | Chart paper, Roll, 80 mm x 2 ch, 100 m, WR3320-2D |
| PZ230-R5A | Chart paper, Z-fold, 110 mm x 40 m, WR300 |
| PZ231A-R5A | Chart paper, Z-fold, 210 mm x 100 m, WR1000, WR8500, WR300 |
| PZ233-R5A | Chart paper, Z-fold, Black, 210 mm x 40m, WR300 series 8&16-ch |
| PZ410-2B-R5A | Chart paper, Z-fold, 40 mm x 2 ch, 100 m, WR3320-2 |
| PZ412-4B-R5A | Chart paper, Z-fold, 40 mm x 4 ch, 100 m, WR3320-4 |
| PZ413-6B-R5A | Chart paper, Z-fold, 40 mm x 6 ch, 100 m, WR3320-6 |
| PZ414-8B-R5A | Chart paper, Z-fold, 40 mm x 8 ch, 100 m, WR3320-8 |
| PZ420-1B-R5A | Chart paper, Z-fold, 80 mm x 1 ch, 100 m, WR3320-1D |
| PZ422-2B-R5A | Chart paper, Z-fold, 80 mm x 2 ch, 100 m, WR3320-2D |
| PZ423-3B-R5A | Chart paper, Z-fold, 80 mm x 3 ch, 100 m, WR3320-3D |
| PZ424-4B-R5A | Chart paper, Z-fold, 80 mm x 4 ch, 100 m, WR3320-4D |
| SP254-R10A | Chart paper, Roll, 40 mm x 1ch, 20 m, WR7200 |
| B-CAL-PDF OS | Calibration Certificate / PDF |
| B-TEST-PDF OS | Test Certificate (Survey & Inspection) / PDF |
| B-TRACE-PDF OS | Traceability Chart / PDF |
| B-CALPAC-PDF OS | Certificates Package (Calibration certificate, Test certificate, Traceability chart) / PDF |
| B-CAL OS | Calibration Certificate / Paper |
| B-TEST OS | Test Certificate (Survey & Inspection) / Paper |
| B-TRACE OS | Traceability Chart / Paper |
| B-CALPAC OS | Certificates Package (Calibration certificate, Test certificate, Traceability chart) / Paper |
Multi-inputs model
Withstand-voltage model
*Need to set up with B-564/B-564-SL/B-565 and B-566
GL980,GL2000
for B-560A
For GL840
(Withstand voltage type)
For GL840
For GL840
For GL840
For GL840
For GL840/GL240
*It is available in limited region. (US, EU, Japan)
(GL840/ＧＬ900)
Built to order
Built to order
(for Replacement)
(for Replacement)
(for Replacement)
1.6m, 1000V CAT II
DATASHEET MANUAL PDF DOWNLOAD
제품 상담, 견적, AS 문의는 공식 인증 대리점 GENIUS INDUSTRIES에 문의하세요!
대한민국 No.1 산업장비 공급채널 지니어스인더스트리
070-8888-7179 / info@geniuss.kr